wraith-ircbot/misc/help.txt

::+ban
###  %b+ban%b <hostmask> [channel] [%%<XdXhXm>] [comment]
   Adds a ban to the list of bans stored on the bot, with optional comment and
   ban time. This ban is stored with your handle as the creator, and will be
   in effect for every channel if no channel is specified. Prefixing a comment
   with '@' will make it only visible within the bot, and not used as the ban
   reason. Ban time has to be expressed in days, hours, and/or minutes.
 
See also: bans, -ban, stick, unstick

::+exempt
###  %b+exempt%b <hostmask> [channel] [%%<XdXhXm>] [comment]
   Adds an exempt to the list of exempts stored on the bot, with optional
   comment and exempt time. This exempt is stored with your handle as the
   creator, and will be in effect for every channel if no channel is specified.
   Exempt time has to be expressed in days, hours, and/or minutes.
 
See also: exempts, -exempt, stick, unstick

::+host
###  %b+host%b [handle] <hostmask>
   Adds a hostmask to a user's user record. Hostmasks are used to identify your
   handle on IRC. If a handle is not specified, the hostmask will be added to
   YOUR user record.
 
See also: -host

::+ignore
###  %b+ignore%b <hostmask> [%%<XdXhXm>] [comment]
   Adds an ignore to the list of ignores stored on the bot, with optional
   comment and ignore time. This ignore is stored with your handle as the
   creator. Ignore time has to be expressed in days, hours, and/or minutes.
 
See also: -ignore, ignores

::+invite
###  %b+invite%b <hostmask> [channel] [%%<XdXhXm>] [comment]
   Adds an invite to the list of invites stored on the bot, with optional
   comment and invite time. This invite is stored with your handle as the
   creator, and will be in effect for every channel if no channel is specified.
   Invite time has to be expressed in days, hours, and/or minutes.
 
See also: invites, -invite, stick, unstick

::+user
###  %b+user%b <handle> [hostmask]
   Creates a new user record for the handle given. The new user record will
   have no flags, an optional hostmask, and a random pass/secpass.
 
See also: -user, +host, -host%(hub)%{+n}, newleaf

:hub:-bot
###  %b-bot%b <bot>
   This is exactly the same as %b'%d-user'%b (it removes a user record). It is
   included for convenience.
 
See also: +user, -user%{+n}, newleaf

::-host
###  %b-host%b <hostmask>
   Removes a host from your handle.
%{+m|m}
###  %b-host%b <handle> <hostmask>
   Removes a hostmask from a user's user record.
%{-}
 
See also: +host

::-ignore
###  %b-ignore%b <hostmask/number>
   Removes the specified ignore from the list of ignores stored on the bot. You
   may also reference the ignore by the number shown by the 'ignores' command.
 
See also: +ignore, ignores

::-user
###  %b-user%b <handle>
   Removes the specified handle's user record.
 
See also: +user%(hub)%{+a}, -bot%{+n}, newleaf

::addlog
###  %baddlog%b <text>
   Adds your comment to the bot's logfile. Bot masters can go back later and
   review the log, and will see your comment (with your handle attached). This
   is useful for explaining confusing activity.
 

::away
###  %baway%b [reason]
   Marks you as "away" on the party line. Your away message will show up in
   the %b'%dwho'%b list, and will be displayed to anyone who tries to send you
   a note. Your notes will be stored, and then displayed to you as soon as you
   are no longer away. Saying something on the party line will automatically
   remove your "away" status, or you can type %b'%dback'%b or %b'%daway'%b by
   itself.
 
See also: back

::back
###  %bback%b
   This marks you as no longer away on the party line.
 
See also: away

:hub:backup
###  %bbackup%b
   This makes the bot write a backup of its entire user list to the disk. 
   This is useful if you feel the need to backup the userfile and channel
   settings.
 
See also: reload, save

:hub:binds
###  %bbinds%b [type/match] [all]
   Shows the Tcl bindings in effect, in a list similar to this:
      Command bindings:
        TYPE FLGS COMMAND              HITS BINDING (TCL)
        msg  -|-  rose                    0 msg_rose
        msg  -|-  go                      0 msg_go
        dcc  m|-  bind                    0 cmd_bind
        pub  -|-  gross                   0 pub_gross
   The fields should be self-explanatory, except for HITS, which records the
   number of times that binding has been called. If not, go read the file
   %b'doc/tcl-commands.doc'%b for help on the Tcl bind command. Note that the
   builtin commands are now shown. You may also specify a type of binding to
   show (i.e. %b'%dbinds msg'%b) or you can specify a wild card match (i.e.
   %b'%dbinds *seen*'%b) if you want to narrow the field a bit. The wild card
   matches will match against the TYPE, COMMAND and BINDING fields. You can
   view more binds by adding 'all' to the end of the command.
 
See also: tcl

:hub:boot
###  %bboot%b <handle[@bot]> [reason]
   Kicks a user off the party line and displays the reason, if you specify
   one. You can also specify a bot, and attempt to boot someone from another
   bot on the botnet, though it may be rejected if that bot does not allow
   remote boots. You can not boot a bot owner.

:hub:botinfo
###  %bbotinfo%b
   Requests information from every bot currently on the botnet. Each bot should
   eventually send you one line containing its version, network setting,
   channels, and uptime.
 
See also: %{+n}bottree, vbottree%{+m}, bots

:hub:bots
###  %bbots%b
   Shows the list of bots currently on the botnet.
   Example:
      Bots: cEvin, ruthie, Killa1
   There is no indication of which bots are directly connected to this current
   bot. %{+n}Use %b'%dwho'%b or %b'%dbottree'%b for that information.%{-}
 
See also: downbots%{+n}, bottree, vbottree%{-}, botinfo

:hub:bottree
###  %bbottree%b
   Shows a tree-format diagram of the bots currently on the botnet. It's just a
   nice way to get a feel for how the bots are physically connected. If 2 bots
   are sharing, a + will be indicated, or a ? if nothing is known.
 
See also: bots, downbots, botinfo, vbottree

:hub:chaddr
###  %bchaddr%b <bot> <address[:bot port[/user port]]>
   Changes the address for a bot. This is the address your bot will try to
   connect to when linking. If the bot has a separate port for bots and users,
   they should be separated  by a slash (/).
%{+a}
   It is not recommneded that this is used, you should change your source,
   and update all bots instead.
%{-}
 
See also: link

::chat
###  %bchat%b <on/off>
###  %bchat%b <[*]channel number/name>
   Changes your current channel on the partyline. When you first connect to
   the partyline, it places you on channel 0 (the main party line).
   Some channels may have assigned names if the assoc module is loaded. For
   these, you can specify the channel by name instead of channel number if
   you wish.
   %b'%dchat off'%b removes you from all channels, including the main party line.
   You can still use bot commands and see the console, but you can't talk to
   anyone except via %b'%dnote'%b. %b'%dchat on'%b returns you to the main party
   line (channel 0) if you were elsewhere.
   If you prefix the channel with a '*', you will join a local channel.
 
See also: console

::chattr
###  %bchattr%b <handle> [flags] [channel]
   This lets you view and change the flags for a user.
   For example, to give Lamer the p and f flags:
      .chattr Lamer +pf
   To remove Denali from the global op list:
      .chattr Denali -o
   You may also do any combination of the above:
      .chattr Fred1 -m+xj-o
   You can also change the flags for Usagi on a specific channel by supplying
   the channel after the attributes:
      .chattr Usagi -m+dk-o #blah
   Changing global and channel specific flags within the same command line is
   also possible (global +f, +o #lamer):
      .chattr Bill f|o #lamer
   Whether or not you change any flags, it will show you the user's attributes
   afterwards. To get a list of all possible flags, see %b'%dhelp whois'%b.
   %bNOTES:%b Only the owner may add or remove the 'a' (admin) or 'n' (owner) flags.
          It is pointless to -a a permanent owner.
          You must remove the permanent owner in the binary.
 
See also: whois

:hub:chhandle
###  %bchhandle%b <oldhandle> <newhandle>
   Changes the handle of a user. For example, to change the handle of user
   'gavroche' to 'jamie', you would use 'chhandle gavroche jamie'.
 
See also: chpass%{+n}, chsecpass

:hub:chpass
###  %bchpass%b <handle> [newpassword]
   Changes a user's password. If you do not specify the new password, the user
   effectively no longer has a password set. A password is needed to get ops,
   join the party line, etc. If the newpassword is 'rand', a random password
   will be used.
 
See also: chhandle%{+n}, chsecpass

::comment
###  %bcomment%b <user> <comment>
   Creates or changes the comment field for a user. The comment field can only
   be seen via 'whois' or 'match'. Non-masters cannot see the comment field.
   Using the comment 'none' will clear a user's comment.

:hub:dccstat
###  %bdccstat%b
   Displays a table-format list of all "dcc" connections in use on the bot.
   Dcc stands for "Direct Client-to-client Communication", and Eggdrop expands
   this to cover every open socket. Any type of network connection to the bot
   is considered a "dcc" connection.
   The headings of the table are:
     %bSOCK%b  the socket number of this connection (always unique)
     %bADDR%b  the ip address mask of the host the bot is connected to, if
           applicable
     %bPORT%b  the port number being used for this connection
     %bNICK%b  the handle of the user or bot, if applicable
     %bHOST%b  the hostname corresponding to the IP address, if available
     %bTYPE%b  the type of dcc connection (see below)
   The types of connections currently possible are as follows (but more are
   being added all the time):
     %bCHAT%b  dcc-chat partyline user
     %bPASS%b  user entering dcc chat (being asked for password)
     %bSEND%b  user sending a file
     %bGET%b   sending a file to a user
     %bGETP%b  pending get (waiting for the user to acknowledge)
     %bLSTN%b  telnet listening port (in place of a hostname, it will show the
           callback procedure name, or a mask of acceptable handles)
     %bT-IN%b  incoming telnet user (being asked for handle)
     %bFILE%b  user in dcc-chat file area
     %bBOT%b   connected bot (botnet connection)
     %bBOT*%b  pending bot link (waiting for acknowledgement)
     %bRELA%b  user in relay connection to another bot
     %b>RLY%b  bot being relay'd to (one for each "RELA")
     %bCONN%b  pending telnet connection (chat, relay, bot-link, etc)
     %bNEW%b   new user via telnet (entering a handle)
     %bNEWP%b  new user via telnet (entering a password)
   In addition, 'CHAT' and 'BOT' have flags listed for each connection. Capital
   letters mean that the flag is on, and lowercase letters mean that the flag
   is off. The flags for 'CHAT' are:
     %bC%b  in file area, but allowed to return to party line
     %bP%b  party line access only
     %bT%b  telnet connection (instead of dcc chat)
     %bE%b  echo is on
     %bP%b  paging is on
     %b6%b  socket is ipv6
   The flags for 'BOT' are:
     %bP%b  ping sent, waiting for reply
     %bU%b  user-file sharing is active
     %bC%b  local bot initiated the connection
     %bO%b  user-file offered, waiting for reply
     %bS%b  in the process of sending the user-file
     %bG%b  in the process of getting the user-file
     %bW%b  warned this bot to stop hubbing
     %bL%b  leaf-only bot (not allowed to be a hub)
     %bI%b  bot is currently in the 'linking' stage
     %bA%b  bot is being aggressively shared with
   For 'CHAT' users, the party-line channel is also listed.

::debug
###  %bdebug%b
   Display a dump of memory allocation information, assuming the bot was
   compiled with memory debugging. It's useless to anyone but developers
   trying to find memory leaks.

::die
###  %bdie%b [reason]
   This kills the bot. The bot goes offline immediately, logging who issued
   the 'die' command. You shouldn't have to use this too often. If you specify
   a reason, it is logged, otherwise the reason is "authorized by <handle>".

::echo
###  %becho%b <on/off>
   Specifies whether you want your messages echoed back to you. If it's on,
   then when you say something on the party line, it will be displayed to you
   just like everyone else will see it. If it's off, then it won't happen.
 
See also: color

::fixcodes
### %bfixcodes%b
     This is for use in situations where the bot gets mixed up about the type
     of connection you have with it. For example, you /CTCP CHAT the bot and
     it thinks you are connecting via telnet, and you see text displayed as
     "Local time is now 17:17" for example instead of "Local time is
     now 17:17". Use this to turn telnet codes on or off/change the display
     mode.

::handle
###  %bhandle%b <new-handle>
   Changes your handle on the bot. This is the handle (nickname) that the
   bot will know you as from this point forward. It is used to log into the
   bot.
 
See also: newpass%{+m}, %(hub)chhand, chpass%{+n}, chsecpass

::ignores
###  %bignores%b [wildcard]
   Shows a list of hostmasks from which the bot is currently ignoring msgs,
   notices, etc. There are two types of ignores: permanent and temporary.
   Permanent ignores never automatically expire. You must use %b'%d-ignore'%b
   to remove them.
   Here is a sample permanent ignore:
      [  1] *!*@217.156.44.184 (perm)
            Wcc: go away
            Started 523 days ago
   The number (1) can be used to reference the ignore if you wish to remove it
   (see %b'%dhelp -ignore'%b). Next is the actual hostmask being ignored. The
   "(perm)" means that the ignore is "permanent": that is, it doesn't
   automatically expire. The second line of the ignore entry is the comment
   ("go away"), and who set the ban (Wcc). The last line shows when the ignore
   was added.
   Here is a sample temporary ignore:
      [ 10] blah!blah@blah.cc (expires in 1 day)
            Wcc: requested
            Started 18:02
   Here, you see the "perm" in the parentheses next to the hostmask is instead
   an expire time. This means that the ignore will expire automatically in one
   day.
   If you use %b'%dignores <wildcard>'%b, it will list all the ignores
   that match against your wildcard.
 
See also: +ignore, -ignore

:hub:link
###  %blink%b [via-bot] <bot-to-link>
   Attempts to link to another hub.  This command is deprecated and not 
   recommended for use.
 
See also: unlink, newleaf%{+a}, -bot

::match
###  %bmatch%b <attr> [channel] [[start] limit]
   This displays all user records with the attributes requested.
   "attr" is of the form:  <+/-><global>[&/|<channel>[&/|<bot>]]
   Specifying "&" as the separator will cause AND style matching.
   For example:
      .match p&o
   This will match all users with both the "p" global flag and the "o" channel
   flag on your current console channel.
   Specifying "|" as the separator will cause OR style matching.
   For example:
     .match p|o
   This will match all users with either the "p" global flag or the "o" channel
   flag on your current console channel. If you specify a channel, it will be
   used instead of the current console channel.
   For example:
     .match p|o #eggdrop
   This will match all users with either the "p" global flag or the "o" channel
   flag on the channel #eggdrop. You can also match bot flags.
   For example:
     .match o|o|h
   This will match all bots with either the "o" global flag, the "o" channel
   flag on the current console channel, or the "h" botflag. You can also limit
   the number of total results returned by specifying a limit at the end of the
   command. A starting point can also be specified.
   For example:
     .match p&o #eggdrop 16 25
   This would show results 16 through 25 matching any users with the "p" global
   flag or the "o" channel flag on #eggdrop.
###  %bmatch%b <wildcard-string> [[start] limit]
   This displays all user records where the user's handle or any of the user's
   hostmasks match the specified wildcard string. You can also limit the number
   of total results returned by specifying a limit at the end of the command. A
   starting point can also be specified.
   For example:
     .match *.edu 16 25
   This would show results 16 through 25 matching any users with a hostmask
   that ends with ".edu".

::me
###  %bme%b <text>
   Performs an action on the party line. This appears as "* Wcc is leaving",
   etc.

::motd
###  %bmotd%b %{+m}<message>%{-}
   This redisplays the partyline Message Of The Day, which was shown when you
   first joined the partyline.%{m) Inclue a message to set the motd.

::newpass
###  %bnewpass%b <password>
   Changes your password on the bot. This is similar to the '/msg <bot> pass'
   command, except you don't need to specify your old password.
 
%(hub)%{+m}See also: chpass%{+n}, chsecpass

::note
###  %bnote%b <nickname[@bot]> <message>
   Sends a private note to a user on the partyline. If that user is currently
   logged in and not marked as away, the message will be received immediately.
   Otherwise, it will be stored and displayed the next time that user joins the
   partyline. To send a note to someone on a different bot, add "nick@bot" to
   the nickname.
 
See also: whom, notes

::page
### %bpage%b <number/off>
   This allows you to slow down the number of lines the bot sends you at once
   via the partyline. When enabled, any commands that send greater than the
   specified number of lines will stop when that number is reached and wait for
   you to type another command (or press enter) to continue. If you have too
   many pending lines, you may be booted off the bot.

::quit
###  %bquit%b [comment]
   This disconnects you from the partyline. If you specify a comment, it will
   be displayed to other partyline users as you leave.

::relay
###  %brelay%b <botname>
   Relays you via telnet to another bot, whether or not it is currently linked.
   The local bot must, however, have a bot record for the bot you wish to
   relay to. Typing .quit or "*bye*" on a line by itself will end the relay.
 
See also: bots%{+n}, newleaf%{+a}, -bot

::reload
###  %breload%b
   Reloads the bot's user file, discarding any changes made since the last
   %b'%dsave'%b command or hourly user file save. Sharebots should probably
   never do this.
 
See also: save

::restart
###  %brestart%b
   Restarts the Tcl interpreter, wipes all timers, reloads all modules, and
   reloads the config file for the bot (which resets any changes made via the
   %b'%dset'%b command and reloads any Tcl scripts your config loads). As with
   the %b'%drehash'%b command, it also saves and reloads the user file from disk.
 
See also: reload, save

:hub:save
###  %bsave%b
   This makes the bot write its entire userfile to disk. This is useful if you
   think the bot is about to crash or something, since the user file is only
   written to disk about once an hour.
 
See also: reload, backup

::simul
###  %bsimul%b <handle> <text>
   This allows you to simulate the specified handle typing the given text.
   For example:
      %dsimul dweeb%d.quit
   This would appear just as if "dweeb" typed "%dquit". This command will not
   work unless eggdrop has simul enabled in the config file. 
 
See also: su

::strip
###  %bstrip%b [modes]
   Allows you to remove embedded 'attribute' codes your partyline output. Valid
   options are:
      %bb%b - remove all boldface codes
      %bc%b - remove all color codes
      %br%b - remove all reverse video codes
      %bu%b - remove all underline codes
      %ba%b - remove all ANSI codes
      %bg%b - remove all ctrl-g (bell) codes
   The mode can also be a modifier like '+c' or '-bu' or '+ru-c'. If
   you omit modes, it will show your current setting.
 
See also: fixcodes, color, echo
%{+m}
###  %bstrip%b <user> [modes]
   Set the strip level of another user. A master can't set their own strip
   flags without prefixing the modes with a '+' or '-'.

::su
###  %bsu%b <user>
   Lets you assume the identity of another user. If you are a global owner,
   this does not require a password. Otherwise, you will be asked for the
   user's password. %b%dquit%b returns you to your original handle.

:hub:trace
###  %btrace%b <bot>
   Sends out a trace signal to another bot. If/when the trace signal returns,
   (and it should!) you will get an output that looks something like this:
      Trace result -> Valis:Stonewall:NoBoty:SomeBoty
   This is a list of the bots connected between you and the destination bot.
   It should also return the time in seconds taken for the trace to occur.
 
See also: bots, bottree, vbottree

:hub:traffic
###  %btraffic%b
   Shows total and daily net traffic stats since the last %b'%drestart'%b.
   Stats groups are IRC, Botnet, Partyline, Transfer.mod and Misc.
 
%{+m}See also: restart

::whoami
###  %bwhoami%b
   Shows your current handle and to what bot you are connected.
 
See also: whom

::end