Merge branch 'master' into next

* master:
  Move /docs to gh-pages branch

docs/README.md

@@ -1,6 +0,0 @@
-## Mirrors
-
-* [wraith.botpack.net/wiki/**PackConfig**](wraith.botpack.net/wiki/PackConfig.html)
-* [wraith.botpack.net/wiki/**PackConfig?version=28**](wraith.botpack.net/wiki/PackConfig_version_28.html)
-* [mirror.shatow.net/wraith/**auth.html**](mirror.shatow.net/wraith/auth.html)
-

docs/_config.yml

@@ -1 +0,0 @@
-theme: jekyll-theme-cayman

docs/_includes/PackConfig.conf

@@ -1,49 +0,0 @@
-/* The < && > indicates the area you must change!
- * Do not leave the <>
- * Credit to Excelsior / CELDROP for this design
- */
-
-/* PACKNAME: name of the pack (no spaces) */
-PACKNAME <name>
-
-/* HASHES
- * This must remain 100% secure/private, this key can retrieve the salts, and
- * the entire botnet could be hijacked, a pass 8 chars or more is suggested
- * DO NOT FORGET THE CLEARTEXT, SAVE IT IN A SAFE PLACE, IT CANNOT BE RECOVERED.
- */
-
-/* BINARYPASS: salted-SHA1
- *   BINARYPASS should be a salted-sha1. (Use the form at the top of this page)
- */
-BINARYPASS <salted-SHA1>
-
-/* DCCPREFIX: 1 char cmd prefix for dcc. (ie, .cmd or !cmd) */
-DCCPREFIX <.>
-
-/* The settings below can each be defined multiple times */
-
-/* OWNER <nick password>
- * Multiple OWNER lines may be defined, each will be added as a +a perm owner.
- *   All perm owners will have remote shell access to your bots.
- * nick: nickname what else?
- * password: initial password for user. DO NOT MAKE THIS YOUR NORMAL PASSWORD.
- *   Password should be a salted-sha1. (Use the form at the top of this page)
- */
-OWNER <YourNick salted-SHA1>
-
-/* HUB <nick host port>
- * Hubs are ranked by the order they are listed.
- * Hubs DO NOT come on IRC.
- * nick: nick of hub
- * host: hostname or ip of hub (A 'dynamic' OR 'changeable' HOSTNAME IS RECOMMENDED)
- * port: port the hub listens on
- *
- * Your hub hosts should NOT be vhosts. They need to be changeable dns,
- *  so you can easily move the hubs later if needed.
- * Use a domain you OWN/CONTROL, or a trusted friend's.
- */
-HUB <hub1 hub1.domain.tld 1234>
-HUB <hub2 hub2.domain.tld 1235>
-
-/* You will also need to add SALTS to your packconfig. These should only be generated <strong>once per botnet.</strong>
-Click the button below to generate SALTS for your botnet. */

docs/_includes/PackConfig_v28.conf

@@ -1,54 +0,0 @@
-/* The < && > indicates the area you must change!
- * Do not leave the <>
- * Credit to Excelsior / CELDROP for this design
- */
-
-/* PACKNAME: name of the pack (no spaces) */
-PACKNAME <name>
-
-/* HASHES
- * This must remain 100% secure/private, this key can retrieve the salts, and
- * the entire botnet could be hijacked, a pass 8 chars or more is suggested
- * DO NOT FORGET THE CLEARTEXT, SAVE IT IN A SAFE PLACE, IT CANNOT BE RECOVERED.
- */
-
-/* SHELLHASH: SHA1 hash
- * Use this URL to generate: <a href="http://www.shatow.net/crypt/">http://www.shatow.net/crypt</a>
- * example: SHELLHASH 637d1f5c6e6d1be22ed907eb3d223d858ca396d8
- */
-SHELLHASH &lt;sha1hash&gt;
-
-/* DCCPREFIX: 1 char cmd prefix for dcc. (ie, .cmd or !cmd) */
-DCCPREFIX &lt;.&gt;
-
-/* The settings below can each be defined multiple times */
-
-/* OWNER &lt;nick password [host] [host2 ...]&gt;
- * Multiple OWNER lines may be defined, each will be added as a +a perm owner.
- * nick: nickname what else?
- * password: initial password for user. DO NOT MAKE THIS YOUR NORMAL PASSWORD.
- * hosts are added for telnet access, but telnet is currently not restricted, so it is optional.
- */
-OWNER &lt;YourNick FirstTimePass&gt;
-
-/* OWNEREMAIL: email addresses that status/errors will be sent to when needed
- * list as many as needed. (This will be removed soon)
- */
-OWNEREMAIL &lt;some@email.com&gt;
-
-/* HUB &lt;nick host port&gt;
- * Hubs are ranked by the order they are listed
- * nick: nick of hub
- * host: hostname or ip of hub (A 'dynamic' OR 'changeable' HOSTNAME IS RECOMMENDED)
- * port: port the hub listens on
- *
- * Your hub hosts should NOT be vhosts. They need to be changable dns.
- * Use a domain you OWN/CONTROL, or a friends.
- */
-HUB &lt;hub1 hub1.domain.tld 1234&gt;
-HUB &lt;hub2 hub2.domain.tld 1235&gt;
-
-SALT1 <span id="salt1">&nbsp;</span>
-SALT2 <span id="salt2">&nbsp;</span>
-
-/* You will also need to add SALTS to your packconfig. These should only be generated <strong>once per botnet.</strong> */

docs/_includes/footer.html

@@ -1,15 +0,0 @@
-{% if site.github.is_project_page %}
-<div class="footer border-top border-gray-light mt-5 pt-3 text-right text-gray">
-<a href="{{ site.github.repository_url }}" class="button"><small>View repository</small></a>
-</div>
-{% endif %}
-<div id="wiki-footer" class="mt-5 mb-0 wiki-footer gollum-markdown-content">
-  <div class="Box Box--condensed bg-gray box-shadow">
-    <div class="Box-body wiki-writable markdown-body">
-      <p><em>Page was mirrored from trac at <a href="http://wraith.botpack.net" rel="nofollow">http://wraith.botpack.net</a></em></p>
-    </div>
-  </div>
-</div>
-</div>
-</body>
-</html>

docs/_includes/header.html

@@ -1,18 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml">
-<head>
-{% if page.title %}
-<title>
-{{ page.title }} – {{ site.description }}
-</title>
-{% endif %}
-<meta charset="UTF-8">
-<meta http-equiv="X-UA-Compatible" content="IE=edge">
-<meta name="viewport" content="width=device-width, initial-scale=1">
-<link rel="stylesheet" href="{{ '/assets/css/style.css?v=' | append: site.github.build_revision | relative_url }}">
-</head>
-<body>
-<div class="container-lg px-3 my-5 markdown-body">
-{% if page.title %}
-<h1>{{ page.title }} – {{ site.description }}</h1>
-{% endif %}

docs/_layouts/default.html

@@ -1,23 +0,0 @@
-<!DOCTYPE html>
-<html lang="en-US">
-  <head>
-    {% if page.title %}
-    <title>
-      {{ page.title }} – {{ site.description }}
-    </title>
-    {% endif %}
-    <meta charset="UTF-8">
-    <meta http-equiv="X-UA-Compatible" content="IE=edge">
-    <meta name="viewport" content="width=device-width, initial-scale=1">
-    {% seo %}
-    <link rel="stylesheet" href="{{ '/assets/css/style.css?v=' | append: site.github.build_revision | relative_url }}">
-  </head>
-  <body>
-    <div class="container-lg px-3 my-5 markdown-body">
-      {% if site.description %}
-      <h1>GitHub Pages: <a href="{{ "/" | absolute_url }}">{{ site.description }}</a></h1>
-      {% endif %}
-
-      {{ content }}
-
-      {% include footer.html %}

docs/_layouts/packconfig.html

@@ -1,75 +0,0 @@
-{% include header.html %}
-<p>
-# <strong>Version 1.2.16.1 (legacy release) requires an older version of this <a class="wiki" href="PackConfig">PackConfig</a>. Please use: <a href="PackConfig_version_28.html">PackConfig?version=28</a></strong>
-</p>
-<p>
-# <strong>Also see a working example at <a class="wiki" href="{{ site.github.repository_url }}/wiki/PackConfigExample">PackConfigExample</a></strong>
-</p>
-<pre>
-/* Salted-SHA1 format:
- *     rand: 12345 (This should be random)
- *     pass: password
- *     format: +12345$SHA1(12345password)
- *     Result: +12345$c553b125c1f87134911fe18e02f29c7ea7027303
- */
-</pre>
-
-# <label for="pass">Pass:</label> <input type="text=" size="50" id="pass" />
-<input type="button" value="Generate Salted SHA1" onClick="saltedSHA1();">
-<br />
-# <label for="salted_sha1">salted_sha1:</label> <input type="text" size="50" readonly id="salted_sha1" onclick="javascript:this.focus();this.select();"/>
-
-<script language="JavaScript" src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/3.1.2/components/core-min.js"></script> 
-<script language="JavaScript" src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/3.1.2/components/sha1-min.js"></script> 
-<script language="javascript" type="text/javascript">
-function randomString(n) {
-	var chars = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXTZabcdefghiklmnopqrstuvwxyz";
-	var string_length = n;
-	var randomstring = '';
-	for (var i=0; i<string_length; i++) {
-		var rnum = Math.floor(Math.random() * chars.length);
-		randomstring += chars.substring(rnum,rnum+1);
-	}
-        return randomstring;
-}
-
-function saltedSHA1() {
-  
-  var salt = randomString(5);
-  var pass = document.getElementById('pass').value;
-  var salted_sha1 = document.getElementById('salted_sha1');
-  salted_sha1.value = '';
-  if (!pass) return;
-  
-  salted_sha1.value = '+' + salt + '$' + CryptoJS.SHA1(salt + pass);
-}
-</script>
-<form name="randform">
-</form>
-
-<pre>
-{% include PackConfig.conf %}
-SALT1 <span id="salt1">&nbsp;</span>
-SALT2 <span id="salt2">&nbsp;</span>
-</pre>
-
-
-<script language="javascript" type="text/javascript">
-function createSalts() {
-  var salt1 = randomString(32);
-  var salt2 = randomString(16);
-  var s1 = document.getElementById('salt1');
-  s1.innerText = salt1;
-  s1.innerHtml = salt1;
-  s1.textContent = salt1;
-  var s2 = document.getElementById('salt2');
-  s2.innerText = salt2;
-  s2.innerHtml = salt2;
-  s2.textContent = salt2;
-}
-
-</script>
-<form name="randform">
-<input type="button" value="Click to Generate Salts" onClick="createSalts();">
-</form>
-{% include footer.html %}

docs/_layouts/packconfig_v28.html

@@ -1,33 +0,0 @@
-{% include header.html %}
-<pre>
-{% include PackConfig_v28.conf %}
-</pre>
-
-<script language="javascript" type="text/javascript">
-function createSalts() {
-  var salt1 = randomString(32);
-  var salt2 = randomString(16);
-  var s1 = document.getElementById('salt1');
-  s1.innerText = salt1;
-  s1.innerHtml = salt1;
-  s1.textContent = salt1;
-  var s2 = document.getElementById('salt2');
-  s2.innerText = salt2;
-  s2.innerHtml = salt2;
-  s2.textContent = salt2;
-}
-function randomString(n) {
-	var chars = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXTZabcdefghiklmnopqrstuvwxyz";
-	var string_length = n;
-	var randomstring = '';
-	for (var i=0; i<string_length; i++) {
-		var rnum = Math.floor(Math.random() * chars.length);
-		randomstring += chars.substring(rnum,rnum+1);
-	}
-        return randomstring;
-}
-</script>
-<form name="randform">
-<input type="button" value="Click to Generate Salts" onClick="createSalts();">
-</form>
-{% include footer.html %}

docs/mirror.shatow.net/wraith/auth.html

@@ -1,107 +0,0 @@
-<HTML><HEAD>
-<BODY>
-<script language="JavaScript" src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/3.1.2/rollups/md5.js"></script> 
-<body>
-<form><table class="indented">
-  <tr><th><FONT color=green>randstring</FONT></th><td><input type="text" name="rand" size="50"></td></tr>
-  <tr><th><FONT color=blue>SECPASS</font></th><td><input type="text" name="secpass" size="15"></td></tr>
-  <tr><th><FONT color=red>AUTHKEY</font></th><td><input type="text" name="authkey" size="50"></td></tr>
-  <tr><th>Calculate</th>
-  <td style="text-align:center">
-  <input type="button" onclick="hash.value = '+Auth ' + CryptoJS.MD5(rand.value + secpass.value + authkey.value)" value="MD5">
-  </td></tr>
-  <tr><th>Result</th><td><input type="text" name="hash" size="50"></td></tr>
-</table></form>
-<!--http://pajhome.org.uk/crypt/md5/-->
-
-<BR><BR><BR>This is the concept of the auth 
-system. The hash is always different. <BR>Only chatbots will accept dcc/msg 
-authing/cmds.<BR><BR>Authing for DCC:<BR><BR>[bot] password?<BR>[you] 
-yourpass<BR>[bot] -Auth <FONT 
-color=green>i/P"R2*Go1)Cij8$-1tvT&amp;5-8d36/bA3(E.1tHl+s4#2FqNpxg</FONT> 
-botnick<BR><BR>Now, at this point, you need to know your <FONT color=blue>SECPASS</FONT> from the bot 
-and the <FONT color=green>AUTHKEY</FONT>.<BR>These can be obtained by asking your admin.<BR>Then you 
-would MD5 the three elements together: 
-<OL>
-  <LI><FONT 
-  color=green>i/P"R2*Go1)Cij8$-1tvT&amp;5-8d36/bA3(E.1tHl+s4#2FqNpxg</FONT> 
-  <LI><FONT color=blue>SECPASS</FONT> 
-  <LI><FONT color=red>AUTHKEY</FONT> </LI></OL>
-<p><BR>
-  MD5: <FONT 
-color=green>i/P"R2*Go1)Cij8$-1tvT&amp;5-8d36/bA3(E.1tHl+s4#2FqNpxg</FONT><FONT 
-color=blue>SECPASS</FONT><FONT color=red>AUTHKEY</FONT><BR>
-  The hash comes out to be: <B>8f783879950efd3e71b7de188ebfa1ad</B><BR>
-  You then paste this back to the bot like so:<BR>
-  <BR>
-  [you] +Auth 8f783879950efd3e71b7de188ebfa1ad<BR>
-  <BR>
-  If you used the correct SECPASS and AUTHKEY, then it will grant you access.<BR>
-  <BR>
-  Authing over IRC is much similar:<BR>
-  <BR>
-  /msg bot auth?<BR>
-  [bot] auth. botnick [if the bot responds with &quot;auth<b>!</b>&quot; then 
-  your host is not added, this will be used in the future.]<BR>
-  [you] auth yourpass<BR>
-  [bot] -Auth i/P"R2*Go1)Cij8$-1tvT&amp;5-8d36/bA3(E.1tHl+s4#2FqNpxg botnick<BR>
-  From here, the hash is made as described earlier<BR>
-  [you] +Auth 8f783879950efd3e71b7de188ebfa1ad<BR>
-  [bot] -notice- You are now authorized for cmds, see +help<BR>
-  <BR>
-  You remain authorized for the following commands until you haven't used a cmd 
-  for 60 minutes or when the bot reconnects.<BR>
-  <BR>
-  MSG/CHAN cmds (<B>as of version 1.0.10 </B>9/25/03):<BR>
-  [you] +help<BR>
-  [bot] op invite getkey voice channels test<BR>
-  Usage for cmds:<BR>
-  <BR>
-  <B>+op</B>/<b>+voice</b> can be used in both channels and msgs.</p>
-<p>+voice is same syntax as +op.</p>
-<p>In msg: </p>
-<UL>
-  <LI>+op #chan: Will op you in #chan if you are not already opped. 
-  <LI>+op: Will op you in all chans you are not already opped in. 
-  <LI>+op -f: Will op you in all channels, even if you are already opped. 
-  <LI>+op -f #chan: Will op you in #chan even if you are already opped.</LI>
-</UL>
-<p>In chan:<BR>
-</p>
-<UL>
-  <LI>+op: Will op you in the chan if you are not already opped. 
-  <LI>+op -f: Will op you in the channel even if you are already opped. 
-</LI></UL><BR><B>+invite</B> is msg only.<BR>
-<UL>
-  <LI>+invite: Will invite you to all +i channels you are not already on. 
-  <LI>+invite #chan: Will invite you to #chan if you are not in there and it is 
-  +i. 
-  <LI>+invite -f: Will invite you to all channels. 
-  <LI>+invite -f #chan: Will invite you to #chan even if you are already there. 
-  </LI></UL><BR><B>+getkey</B> is msg only.<BR>
-<UL>
-  <LI>+getkey #chan: Will notice you the key for #chan if there is a key set. 
-  </LI></UL>
-<p><b>+channels</b> works in both msg and channel</p>
-<UL>
-  <LI>+channels: Lists all channels you have op access to.<BR>
-</UL>
-    <BR>
-  Now that you have read all of that you deserve some scripts ;)<BR>
-    <BR>
-    Type /helpauth in these for further instructions.<BR>
-<UL>
-  <li>mIRC <a href="scripts/mIRC.tar.gz">tar.gz</a> <B>5.80 and up</B> 
-  </li>
-  <LI>BitchX/ircii <a href="scripts/BitchX.tgz">tar.gz</a>
-  <LI>irssi/perl <a href="scripts/irssi.tgz">tar.gz</a>
-  <LI>X-chat/perl (I have an unfinished one if you want it, it doesn't work though)
-</UL>
-<p><BR>
-  Any script without a link is in progress, expect it shortly.<BR>
-  Seeing how the script SHOULD operate, maybe you could write one yourself for 
-  your client? ;) [make sure to send it to me so I can post here]<BR>
-</p>
-<p>Until then, use <a href="md5.tgz">this</a> to generate the hashes (Compilable md5 executable for 
-  *nix) </p>
-</BODY></HTML>

docs/wraith.botpack.net/wiki/PackConfig.html

@@ -1,4 +0,0 @@
----
-title: PackConfig
-layout: packconfig
----

docs/wraith.botpack.net/wiki/PackConfig.txt

@@ -1,126 +0,0 @@
-# '''Version 1.2.16.1 (legacy release) requires an older version of this PackConfig. Please use: http://wraith.botpack.net/wiki/PackConfig?version=28'''
-
-# '''Also see a working example at PackConfigExample'''
-
-{{{
-#!html
-<pre>
-/* Salted-SHA1 format:
- *     rand: 12345 (This should be random)
- *     pass: password
- *     format: +12345$SHA1(12345password)
- *     Result: +12345$c553b125c1f87134911fe18e02f29c7ea7027303
- */
-</pre>
-
-# <label for="pass">Pass:</label> <input type="text=" size="50" id="pass" />
-<input type="button" value="Generate Salted SHA1" onClick="saltedSHA1();">
-<br />
-# <label for="salted_sha1">salted_sha1:</label> <input type="text" size="50" readonly id="salted_sha1" onclick="javascript:this.focus();this.select();"/>
-
-<script language="JavaScript" src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/3.1.2/components/core-min.js"></script> 
-<script language="JavaScript" src="https://cdnjs.cloudflare.com/ajax/libs/crypto-js/3.1.2/components/sha1-min.js"></script> 
-<script language="javascript" type="text/javascript">
-function randomString(n) {
-  var chars = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXTZabcdefghiklmnopqrstuvwxyz";
-  var string_length = n;
-  var randomstring = '';
-  for (var i=0; i<string_length; i++) {
-    var rnum = Math.floor(Math.random() * chars.length);
-    randomstring += chars.substring(rnum,rnum+1);
-  }
-        return randomstring;
-}
-
-function saltedSHA1() {
-  
-  var salt = randomString(5);
-  var pass = document.getElementById('pass').value;
-  var salted_sha1 = document.getElementById('salted_sha1');
-  salted_sha1.value = '';
-  if (!pass) return;
-  
-  salted_sha1.value = '+' + salt + '$' + CryptoJS.SHA1(salt + pass);
-}
-</script>
-<form name="randform">
-</form>
-
-<pre>
-/* The &lt; && &gt; indicates the area you must change!
- * Do not leave the &lt;&gt;
- * Credit to Excelsior / CELDROP for this design
- */
-
-/* PACKNAME: name of the pack (no spaces) */
-PACKNAME &lt;name&gt;
-
-/* HASHES
- * This must remain 100% secure/private, this key can retrieve the salts, and
- * the entire botnet could be hijacked, a pass 8 chars or more is suggested
- * DO NOT FORGET THE CLEARTEXT, SAVE IT IN A SAFE PLACE, IT CANNOT BE RECOVERED.
- */
-
-/* BINARYPASS: salted-SHA1
- *   BINARYPASS should be a salted-sha1. (Use the form at the top of this page)
- */
-BINARYPASS &lt;salted-SHA1&gt;
-
-/* DCCPREFIX: 1 char cmd prefix for dcc. (ie, .cmd or !cmd) */
-DCCPREFIX &lt;.&gt;
-
-/* The settings below can each be defined multiple times */
-
-/* OWNER &lt;nick password&gt;
- * Multiple OWNER lines may be defined, each will be added as a +a perm owner.
- *   All perm owners will have remote shell access to your bots.
- * nick: nickname what else?
- * password: initial password for user. DO NOT MAKE THIS YOUR NORMAL PASSWORD.
- *   Password should be a salted-sha1. (Use the form at the top of this page)
- */
-OWNER &lt;YourNick salted-SHA1&gt;
-
-/* HUB &lt;nick host port&gt;
- * Hubs are ranked by the order they are listed.
- * Hubs DO NOT come on IRC.
- * nick: nick of hub
- * host: hostname or ip of hub (A 'dynamic' OR 'changeable' HOSTNAME IS RECOMMENDED)
- * port: port the hub listens on
- *
- * Your hub hosts should NOT be vhosts. They need to be changeable dns,
- *  so you can easily move the hubs later if needed.
- * Use a domain you OWN/CONTROL, or a trusted friend's.
- */
-HUB &lt;hub1 hub1.domain.tld 1234&gt;
-HUB &lt;hub2 hub2.domain.tld 1235&gt;
-
-/* You will also need to add SALTS to your packconfig. These should only be generated <strong>once per botnet.</strong>
-Click the button below to generate SALTS for your botnet. */
-
-SALT1 <span id="salt1">&nbsp;</span>
-SALT2 <span id="salt2">&nbsp;</span>
-</pre>
-
-
-<script language="javascript" type="text/javascript">
-function createSalts() {
-  var salt1 = randomString(32);
-  var salt2 = randomString(16);
-  var s1 = document.getElementById('salt1');
-  s1.innerText = salt1;
-  s1.innerHtml = salt1;
-  s1.textContent = salt1;
-  var s2 = document.getElementById('salt2');
-  s2.innerText = salt2;
-  s2.innerHtml = salt2;
-  s2.textContent = salt2;
-}
-
-</script>
-<form name="randform">
-<input type="button" value="Click to Generate Salts" onClick="createSalts();">
-</form>
-
-}}}
-
-

docs/wraith.botpack.net/wiki/PackConfig_version_28.html

@@ -1,4 +0,0 @@
----
-title: PackConfig version 28
-layout: packconfig_v28
----

docs/wraith.botpack.net/wiki/PackConfig_version_28.txt

@@ -1,90 +0,0 @@
-{{{
-#!html
-<pre>
-/* The &lt; && &gt; indicates the area you must change!
- * Do not leave the &lt;&gt;
- * Credit to Excelsior / CELDROP for this design
- */
-
-/* PACKNAME: name of the pack (no spaces) */
-PACKNAME &lt;name&gt;
-
-/* HASHES
- * This must remain 100% secure/private, this key can retrieve the salts, and
- * the entire botnet could be hijacked, a pass 8 chars or more is suggested
- * DO NOT FORGET THE CLEARTEXT, SAVE IT IN A SAFE PLACE, IT CANNOT BE RECOVERED.
- */
-
-/* SHELLHASH: SHA1 hash
- * Use this URL to generate: <a href="http://www.shatow.net/crypt/">http://www.shatow.net/crypt</a>
- * example: SHELLHASH 637d1f5c6e6d1be22ed907eb3d223d858ca396d8
- */
-SHELLHASH &lt;sha1hash&gt;
-
-/* DCCPREFIX: 1 char cmd prefix for dcc. (ie, .cmd or !cmd) */
-DCCPREFIX &lt;.&gt;
-
-/* The settings below can each be defined multiple times */
-
-/* OWNER &lt;nick password [host] [host2 ...]&gt;
- * Multiple OWNER lines may be defined, each will be added as a +a perm owner.
- * nick: nickname what else?
- * password: initial password for user. DO NOT MAKE THIS YOUR NORMAL PASSWORD.
- * hosts are added for telnet access, but telnet is currently not restricted, so it is optional.
- */
-OWNER &lt;YourNick FirstTimePass&gt;
-
-/* OWNEREMAIL: email addresses that status/errors will be sent to when needed
- * list as many as needed. (This will be removed soon)
- */
-OWNEREMAIL &lt;some@email.com&gt;
-
-/* HUB &lt;nick host port&gt;
- * Hubs are ranked by the order they are listed
- * nick: nick of hub
- * host: hostname or ip of hub (A 'dynamic' OR 'changeable' HOSTNAME IS RECOMMENDED)
- * port: port the hub listens on
- *
- * Your hub hosts should NOT be vhosts. They need to be changable dns.
- * Use a domain you OWN/CONTROL, or a friends.
- */
-HUB &lt;hub1 hub1.domain.tld 1234&gt;
-HUB &lt;hub2 hub2.domain.tld 1235&gt;
-
-SALT1 <span id="salt1">&nbsp;</span>
-SALT2 <span id="salt2">&nbsp;</span>
-</pre>
-
-/* You will also need to add SALTS to your packconfig. These should only be generated <strong>once per botnet.</strong> */
-
-<script language="javascript" type="text/javascript">
-function createSalts() {
-  var salt1 = randomString(32);
-  var salt2 = randomString(16);
-  var s1 = document.getElementById('salt1');
-  s1.innerText = salt1;
-  s1.innerHtml = salt1;
-  s1.textContent = salt1;
-  var s2 = document.getElementById('salt2');
-  s2.innerText = salt2;
-  s2.innerHtml = salt2;
-  s2.textContent = salt2;
-}
-function randomString(n) {
-  var chars = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXTZabcdefghiklmnopqrstuvwxyz";
-  var string_length = n;
-  var randomstring = '';
-  for (var i=0; i<string_length; i++) {
-    var rnum = Math.floor(Math.random() * chars.length);
-    randomstring += chars.substring(rnum,rnum+1);
-  }
-        return randomstring;
-}
-</script>
-<form name="randform">
-<input type="button" value="Click to Generate Salts" onClick="createSalts();">
-</form>
-
-}}}
-
-