tuya-local/custom_components/tuya_local/devices/gratkit_filament_dryer.yaml

name: Filament dryer
products:
  - id: mxct11k2jqpak13a
    name: GratKit Firefly Smart Dryer Box
primary_entity:
  entity: switch
  icon: "mdi:heat-pump"
  dps:
    - id: 1
      name: switch
      type: boolean
secondary_entities:
  - entity: number
    name: Drying temperature
    category: config
    icon: "mdi:thermometer-lines"
    mode: box
    dps:
      - id: 20
        type: integer
        name: value
        unit: C
        range:
          min: 40
          max: 70
  - entity: sensor
    class: temperature
    dps:
      - id: 21
        type: integer
        name: sensor
        unit: C
        class: measurement
  - entity: sensor
    name: Time remaining
    class: duration
    dps:
      - id: 101
        type: integer
        name: sensor
        unit: min
  - entity: number
    name: Drying time
    icon: "mdi:fan-clock"
    category: config
    dps:
      - id: 101
        type: integer
        name: value
        unit: min
        range:
          min: 0
          max: 1440
  - entity: sensor
    class: humidity
    dps:
      - id: 102
        type: integer
        name: sensor
        unit: "%"
        class: measurement
  - entity: select
    name: Light
    icon: "mdi:led-strip-variant"
    dps:
      - id: 103
        type: string
        name: option
        mapping:
          - dps_val: "0"
            value: "Off"
          - dps_val: "1"
            value: Red
          - dps_val: 2
            value: Green
          - dps_val: 3
            value: Blue
          - dps_val: 4
            value: White
          - dps_val: 5
            value: Yellow
          - dps_val: 6
            value: Cyan
          - dps_val: 7
            value: Purple
          - dps_val: 8
            value: Orange
          - dps_val: 9
            value: Pink
          - dps_val: 10
            value: Rainbow fade
          - dps_val: 11
            value: Rainbow blink
          - dps_val: 12
            value: Rainbow smooth
  - entity: sensor
    class: temperature
    name: Heating plate temperature
    category: diagnostic
    icon: "mdi:heating-coil"
    dps:
      - id: 104
        type: integer
        name: sensor
        unit: C
        class: measurement
  - entity: select
    name: Filament type
    icon: "mdi:movie-roll"
    category: config
    dps:
      - id: 105
        type: string
        name: option
        mapping:
          - dps_val: PLA
            value: "PLA"
          - dps_val: PLA_J
            value: "PLA+"
          - dps_val: PETG
            value: "PETG"
          - dps_val: ABS
            value: "ABS"
          - dps_val: Nylon
            value: "Nylon"
          - dps_val: PC
            value: "PC"
          - dps_val: HIPS
            value: "HIPS"
          - dps_val: TPU
            value: "TPU"
          - dps_val: DIY1
            value: "DIY1"
          - dps_val: DIY2
            value: "DIY2"
  - entity: sensor
    name: Error
    category: diagnostic
    class: enum
    icon: "mdi:alert-circle-outline"
    dps:
      - id: 106
        name: sensor
        type: string
        mapping:
          - dps_val: 0
            value: "Normal"
          - dps_val: 1
            value: "Dryer box tilted"
          - dps_val: 2
            value: "Heat plate overheated"
          - dps_val: 3
            value: "Dryer box overheated"
          - dps_val: 4
            value: "Fan RPM too low"
          - dps_val: 5
            value: "5"
          - dps_val: 6
            value: "6"
          - dps_val: 7
            value: "7"
          - dps_val: 8
            value: "8"
          - dps_val: 9
            value: "9"
  - entity: sensor
    name: Fan speed
    category: diagnostic
    icon: "mdi:fan"
    dps:
      - id: 107
        type: integer
        name: sensor
        unit: "rpm"
  - entity: binary_sensor
    name: USB
    icon: "mdi:usb-port"
    category: diagnostic
    dps:
      - id: 108
        type: boolean
        name: sensor