Estevão Costa
README.md
Device Configuration Files
This directory contains device configuration files, describing the workings of supported devices. The files are in YAML format, and describe the mapping of Tuya DPs (Data Points) to HomeAssistant attributes.
Each Tuya device may correspond to one or more entities in Home Assistant.
The Top Level
The top level of the device configuration defines the following:
name
The device should be named descriptively with a name the user would recognize. In general, the brand and model of the device should go under products, and a generic name for the type of device should go in the top level name.
products
Optional.
A list of products that this config applies to. Each product in the list must
have an id specified, which corresponds to the product_id from cloud device
info, or productKey from the local discovery. If these are different, it is
recommended that listings are created for both.
In addition to the id, the manufacturer, model and model_id (if
the model has both a name and a more code like id) can be listed here.
In future the intention is to display these in the Device info panel
for the device. The name can also be overridden here with a more
specific name to be used in future in place of the generic name at the
top of the config.
entities
This contains a list of Home Assistant entities providing the functionality of the device.
The configuration for each entity in the list is detailed in the section below.
Entity configuration
entity
The Home Assistant entity type being configured. See the Entity types section below for details on specific requirements for each entity type.
class
Optional.
For some entity types, a device class can be set, for example switch
entities can have a class of outlet. This may slightly alter the UI
behaviour.
For most entities, it will alter the default icon, and for binary sensors
also the state that off and on values translate to in the UI.
translation_key / translation_only_key
Optional
A key used to define strings and icons for this entity. If this is used, the name can be omited and instead defined in the translations files.
translation_key will be used to generate IDs when there is no name defined.
If the intention is to have an unnamed entity, or to inherit from class, then
use translation_only_key instead (this is mostly useful to retain
backward compatibility where translation_key is used to define icons and
attribute strings but not the entity name.
translation_placeholders
Optional
A container for placeholders to be used in the translation string. Contents are a mapping from parameter keys used in the translation files, to actual values to be used for this entity. If this is specified, then either translation_key or translation_only_key must be specified with it.
Example:
translation_key: switch_x
translation_placeholders:
x: "1"
category
Optional.
This specifies the entity category of the entity. Entities can be categorized
as config or diagnostic to restrict where they appear automatically in
Home Assistant.
name
Optional.
The name associated with this entity can be set here. If no name is set, it will inherit the name at the top level. This is mostly useful for overriding the name entities to give more information about the purpose of the entity, or to differentiate multiple entities of the same type.
Where possible, translation_key should be used instead of an explicit name.
mode
Optional. For number entities, default="auto", for others, None
For number entities, this can be used to force slider or box as the
input method. The default auto uses a slider if the range is small enough,
or a box otherwise. It is recommended to let HA decide based on its own logic
which mode to use, and override it in the UI settings rather than forcing
your personal preference on others. But if an entity really does only make
sense with one UI mode, then this is provided to handle those cases.
dps
This is a list of the definitions for the Tuya DPs associated with attributes of this entity. There should be one list entry for each supported DPs reported by the device.
The configuration of DPs entries is detailed in its own section below.
DPs configuration
id
Every DP must have a numeric ID matching the DP ID in the Tuya protocol.
type
The type of data returned by the Tuya API. Can be one of the following:
- string can contain arbitrary text.
- boolean can contain the values True or False.
- integer can contain only numbers. Integers can have range set on them, be scaled and steped
- bitfield is a special case of integer, where the bits that make up the value each has individal meaning.
- unixtime is a special case of integer, where the device uses a unix timestamp (seconds since 1970-01-01 00:00), which is converted to a datetime for Home Assistant
- base64 is a special case of string, where binary data is base64 encoded. Platforms that use this type will need special handling to make sense of the data.
- hex is a special case of string, where binary data is hex encoded. Platforms that use this type will need special handling to make sense of the data.
- json is a special case of string, where multiple data points are encoded in json format in the string. Platforms that use this type will need special handling to make sense of the data.
- utf16b64 is a special case of string, where a UTF-16 string is base64 encoded. This will be decoded into a UTF-8 string so it is readable in Home Assistant.
- float can contain floating point numbers. No known devices use this, but it is supported if needed.
name
The name given to the attribute in Home Assistant. Certain names are used by the Home Assistant entities for specific purposes. If a name is not recognized as a standard attribute by the entitiy implementation, the attribute will be returned as a readonly extra attribute on the entity. If you need non-standard attributes to be able to be set, you will need to use an entity for that (typically switch, number or select).
sensitive
Optional, default false.
A boolean setting yo mark attributes as containing potentially sensitive data. Setting this to true will result in the data being redacted in device diagnostics output.
readonly
Optional, default false.
A boolean setting to mark attributes as readonly. If not specified, the
default is false. If set to true, the attributes will be reported
to Home Assistant, but attempting to set them will result in an error.
This is only needed in contexts where it would normally be possible to set
the value. If you are creating a sensor entity, or adding an attribute of an
entity which is inherently read-only, then you do not need to specify this.
optional
Optional, default false.
A boolean setting to mark attributes as optional. This allows a device to be matched even if it is not sending the dp at the time when adding a new device. It can also be used to match a range of devices that have variations in the extra attributes that are sent.
persist
Optional, default true.
Whether to persist the value if the device does not return it on every status refresh. Some devices don't return every value on every status poll. In most cases, it is better to remember the previous value, but in some cases the dp is used to signal an event, so when it is next sent, it should trigger automations even if it is the same value as previously sent. In that case the value needs to go to null in between when the device is not sending it.
force
Optional, default false.
A boolean setting to mark dps as requiring an explicit update request to fetch. Many energy monitoring smartplugs require this, without a explicit request to update them, such plugs will only return monitoring data rarely or never. Devices can misbehave if this is used on dps that do not require it. Use this only where needed, and generally only on read-only dps.
precision
Optional, default None.
For integer dps that are sensor values, the suggested precision for display in Home Assistant can be specified. If unspecified, the Home Assistant will use the native precision, which is calculated based on the scale of the dp so as to provide distinct values with as few decimal places as possible. For example a scale of 3 will result in one decimal place by default, (values displayed as x.3, x.7 rather than x.33333333 and x.666666) but you could override that to 2 or 0 with by specifying the precision explicitly.
mapping
Optional. Must be a list with each item starting with a - (a dash and a space):
This can be used to define a list of additional rules that modify the DP
to Home Assistant attribute mapping to something other than a one to one
copy.
The rules can range from simple value substitution to complex relationships involving other attributes.
hidden
Optional, default false.
This can be used to define DPs that do not directly expose Home Assistant
attributes. When set to true, no attribute will be sent. A name should
still be specified and the attribute can be referenced as a constraint
from mapping rules on other attributes to implement complex mappings.
An example of use is a climate device, where the Tuya device keeps separate
temperature settings for different Normal and Eco preset modes. The Normal
temperature setting is exposed through the standard temperature
Home Assistant attribute on the climate device, but the eco_temperature
setting on a different DP is set to hidden. Mapping Rules are used on the
temperature attribute to redirect to eco_temperature when preset_mode
is set to Eco.
range
Optional, may be required in some contexts, may have defaults in others.
For integer attributes that are not readonly, a range can be set with min
and max values that will limit the values that the user can enter in the
Home Assistant UI. This can also be set in a mapping or conditions block.
unit
Optional, default="C" for temperature dps on climate devices.
For temperature dps, some devices will use Fahrenhiet. This needs to be
indicated back to HomeAssistant by defining unit as "F". For sensor
entities, see the HomeAssistant developer documentation for the full list
of possible units (C and F are automatically translated to their Unicode
equivalents, other units are currently ASCII so can be easily entered directly).
class
Optional.
For sensors, this sets the state class of the sensor (measurement, total or total_increasing)
format
Optional.
For base64 and hex types, this specifies how to decode the binary data (after hex or base64 decoding).
This is a container field, the contents of which should be a list consisting of name, bytes and range fields. range is as described above. bytes is the number of bytes for the field, which can be 1, 2, or 4. name is a name for the field, which will have special handling depending on
the device type.
mask
Optional.
For base64 and hex types, this specifies how to extract a single numeric value from the binary data. The value should be a hex bit mask (eg 00FF00 to extract the middle byte of a 3 byte value). Unlike format, this does not require special handling in the entity platform, as only a single value is being extracted.
endianness
Optional, default="big"
For base64 and hex types, this specifies the endianess of the data and mask. Could be "big" or "little".
Mapping Rules
Mapping rules can change the behavior of attributes beyond simple copying of DP values to attribute values. Rules can be defined without a dps_val to apply to all values, or a list of rules that apply to particular dp values can be defined to change only particular cases. Rules can even depend on the values of other elements.
dps_val
Optional, if not provided, the rule is a default that will apply to all values not covered by their own dps_val rule.
dps_val defines the DP value that each
rule in the list applies to. This can be used to map specific values from the
Tuya protocol into attribute values that have specific meaning in Home
Assistant. For example, climate entities in Home Assistant define modes
"off", "heat", "cool", "heat_cool", "auto" and "dry". But in the Tuya protocol,
a simple heater just has a boolean off/on switch.
A dps_val of null can be used to specify a value to be assumed when a
dp is not being returned by the device, to avoid None in some locations where
that causes an issue such as entities showing as unavailable. Such a mapping
is one-way, the value will not be mapped back to a null when setting the dp.
value
Optional.
This can be used to set the attribute value seen by Home Assistant to something
different than the DP value from the Tuya protocol. Normally it will be used
with dps_val to map from one value to another. Without dps_val it will
one-way map all otherwise unmapped dps values to the specified value. This
can be useful for a binary_sensor.
hidden
Optional, default=false
When set to true, the mapping value is hidden from the list of all values. This can be used for items that should not be available for selection by the user but you still want to map for feedback coming from the device. For example, some devices have a "Manual" mode, which is automatically selected when adjustments are made to other settings, but should not be available as an explicit mode for the user to select.
available
Optional.
This works the similarly to hidden above, but instead of a boolean
value, this should be set to the name of an attribute, which returns a
boolean value, so that the value can be dynamically hidden or shown. A
typical use is where variants of a device use the same config, and
have a flag attribute that indicates whether certain features are
available or not. The mapping will be hidden from the values list when
the referenced attribute is showing false, and shown when it is true.
scale
Optional, default=1.
This can be used in an integer dp mapping to scale the values. For example
some climate devices represent the temperature as an integer in tenths of
degrees, and require a scale of 10 to convert them to degrees expected by
Home Assistant. The scale can also be the other way, for a fan with speeds
1, 2 and 3 as DP values, this can be converted to a percentage with a scale
of 0.03.
invert
Optional, default=False.
This can be used in an integer dp mapping to invert the range. For example,
some cover devices have an opposite idea of which end of the percentage scale open
and closed are from what Home Assistant assumes. To use this mapping option, a range
must also be specified for the dp.
step
Optional, default=1.
This can be used in an integer dp mapping to make values jump by a specific
step. It can also be set in a conditions block so that the steps change only
under certain conditions. An example is where a value has a range of 0-100, but
only allows settings that are divisible by 10, so a step of 10 would be set.
target_range
Optional, has min and max child attributes, like range
A target range is used together with range on a numeric value, to
map the value into a new range. Unlike scale, this can shift the
value as well as scale it into the new range. Color temperature is a
major use of this, as Tuya devices often use a range of 0 - 100, 0 -
255 or 0 - 1000, and this needs to be mapped to the Kelvin like 2200 -
6500.
This should normally only be used on a default mapping, as the code that uses this feature often needs to inform HA of the min and max values for the UI, which may not handle multipe different mappings across the range.
icon
Optional. Deprecated since HA 2024.2 (use translation_key and icons.json to define icons)
This can be used to override the icon. Most useful with a dps_val which
indicates a change from normal operating mode, such as "fan-only",
"defrosting", "tank-full" or some error state.
icon_priority
Optional. Default 10. Lower numbers mean higher priorities. Deprecated, icons should be defined using icons.json and translation_key since HA 2024.2
When a number of rules on different attributes define icon changes, you
may need to control which have priority over the others. For example,
if the device is off, probably it is more important to indicate that than
whether it is in fan-only or heat mode. So in the off/on DP, you might
give a priority of 1 to the off icon, 3 to the on icon, and in the mode DP
you could give a priority of 2 to the fan icon, to make it override the
normal on icon, but not the off icon.
If you don't specify any priorities, the icons will all get the same priority,
so if any overlap exists in the rules, it won't always be predictable which
icon will be displayed.
value_redirect
Optional.
When value_redirect is set, the value of the attribute and any attempt to
set it will be redirected to the named attribute instead of the current one.
An example of how this can be useful is where a Tuya heater has a dp for the
target temperature in normal mode, and a different dp for the target
temperature is "eco" mode. Depending on the preset_mode, you need to use
one or the other. But Home Assistant just has one temperature attribute for
setting target temperature, so the mapping needs to be done before passing to
Home Assistant.
value_mirror
Optional.
When value_mirror is set, the value of the attribute will be redirected to
the current value of the named attribute. Unlike value_redirect, this does
not redirect attempts to set the dp to the redirected dp, but when used in
a map, this can make the mapping dynamic.
An example of how this can be useful is where a thermostat can be configured to control either a heating or cooling device, but it is not expected to change this setting during operation. Once set up, the hvac_mode dp can have a mapping that mirrors the value of the configuration dp.
invalid
Optional, default false.
Invalid set to true allows an attribute to temporarily be set read-only in
some conditions. Rather than passing requests to set the attribute through
to the Tuya protocol, attempts to set it will throw an error while it meets
the conditions to be invalid. It does not make sense to set this at mapping
level, as it would cause a situation where you can set a value then not be
able to unset it. Instead, this should be used with conditions, below, to
make the behaviour dependent on another DP, such as disabling fan speed
control when the preset is in sleep mode (since sleep mode should force low).
default
Optional, default false.
Default set to true allows an attribute to be set as the default value. This is used by some entities when an argument is not provided to a service call but the attribute is required to be set to function correctly. An example is the siren entity which uses the tone attribute to turn on and off the siren, but when turn_on is called without any argument, it needs to pick a default tone to use to turn on the siren.
constraint
Optional, always paired with conditions. Default if unspecified is the current attribute
If a rule depends on an attribute other than the current one, then constraint
can be used to specify the element that conditions applies to. constraint can also refer back to the same attribute - this can be useful for specifying conditional mappings, for example to support two different variants of a device in a single config file, where the only difference is the way they represent enum attributes.
conditions
Optional, usually paired with constraint.
Conditions defines a list of rules that are applied based on the constraint attribute. The contents are the same as Mapping Rules, but dps_val applies to the attribute specified by constraint, and also can be a list of values to match as well rather than a single value. All others act on the current attribute as they would in the mapping. Although conditions are specified within a mapping, they can also contain a mapping of their own to override that mapping. These nested mappings are limited to simple dps_val to value substitutions, as more complex rules would quickly become too complex to manage.
When setting a dp which has conditions attached, the behaviour is slightly different depending on whether the constraint dp is readonly or not.
For non-readonly constraints that specify a single dps_val, the constraint dp will be set along with the target dp so that the first condition with a value matching the target value is met.
For readonly constraints, the condition must match the constraint dp's current value for anything to be set.
Example
...
name: target_dp
mapping:
- dps_val: 1
constraint: constraint_dp
conditions:
- dps_val: a
value: x
- dpa_val: c
value: z
- dps_val: 2
constraint: constraint_dp
conditions:
- dps_val: b
value: x
- dps_val: c
value: y
If constraint_dp is not readonly:
| constraint_dp current dps_val | target_dp target value | dps set |
|---|---|---|
| a | x | target_dp: 1, constraint_dp: a |
| a | y | target_dp: 2, constraint_dp: c |
| a | z | target_dp: 1, constraint_dp: c |
| b | x | target_dp: 1, constraint_dp: a |
| b | y | target_dp: 2, constraint_dp: c |
| b | z | target_dp: 1, constraint_dp: c |
| c | x | target_dp: 1, constraint_dp: a |
| c | y | target_dp: 2, constraint_dp: c |
| c | z | target_dp: 1, constraint_dp: c |
If constraint_dp is readonly:
| current constraint_dp | target target_dp | dps set |
|---|---|---|
| a | x | target_dp: 1 |
| a | y | - |
| a | z | - |
| b | x | target_dp: 2 |
| b | y | - |
| b | z | - |
| c | x | - |
| c | y | target_dp: 2 |
| c | z | target_dp: 1 |
Note that each condition must specify a dps_val to match againt. If you want to specify a default match, do it outside the conditions.
mapping:
- dps_val: some_value
value: defaulted
constraint: other_dp
conditions:
- dps_val: other_value
value: overridden
Generic dps
The following dps may be defined for any entity type. The names should be avoided for any extra attribute that is not for the listed purpose.
- available (optional, string) a dp name that returns a boolean indicating whether the entity should show as available or not (even when it appears to be returning valid state). This may be used to disable entities that the device indicates it does not support, through a feature flag dp. This should only be used when the device is permanently indicating a missing feature, as HA may hide the entity if it is marked as unavailable early enough during startup.
Entity types
Entities have specific mappings of dp names to functions. Any unrecognized dp name is added to the entity as a read-only extra attribute, so can be observed and queried from HA, but if you need to be able to change it, you should split it into its own entity of an appropriate type (number, select, switch for example).
If the type of dp does not match the expected type, a mapping should be provided to convert. Note that "on" and "off" require quotes in yaml, otherwise it they are interpretted as true/false.
Many entity types support a class attribute which may change the UI behaviour, icons etc. See the HA documentation for the entity type to see what is valid (these may expand over time)
alarm_control_panel
- alarm_state (required, string) the alarm state, used to report and change the current state of the alarm. Expects values from the set
disarmed,armed_home,armed_away,armed_night,armed_vacation,armed_custom_bypass,pending,arming,disarming,triggered. Other states are allowed for read-only status, but only the armed... and disarmed states are available as commands. - trigger (optional, boolean) used to trigger the alarm remotely for test or panic button etc.
binary_sensor
- sensor (required, boolean) the dp to attach to the sensor.
button
- button (required, boolean) the dp to attach to the button. Any read value will be ignored, but the dp is expected to be present for device detection unless set to optional. A value of true will be sent for a button press, map this to the desired dps_val if a different value is required.
camera
- motion_enable (optional, boolean) a dp that enables and disables motion detection features built into the camera.
- record (optional, boolean) a dp that turns reecording on and off.
- snapshot (optional, base64 string) a dp that returns a snapshot image. from the camera.
- switch (optional, boolean) a dp to turn the camera on and off.
NOTE: tuya-local does not directly support video streaming from cameras. Some cameras provide ONVIF or WebRTC compliant streams locally which you can use the relevant integrations to capture, others may be cloud-only.
climate
- current_temperature (optional, number) a dp that reports the current temperature.
- current_humidity (optional, number) a dp that reports the current humidity (%).
- fan_mode (optional, mapping of strings) a dp to control the fan mode if available.
Any value is allowed, but HA has some standard modes:
"on", "off", auto, low, medium, high, top, middle, focus, diffuse - humidity (optional, number) a dp to control the target humidity if available. (%)
- hvac_mode (optional, mapping of strings) a dp to control the mode of the device.
Possible values are:
"off", cool, heat, heat_cool, auto, dry, fan_only - hvac_action (optional, string) a dp that reports the current action of the device.
Possible values are:
"off", idle, cooling, heating, drying, fan, defrosting - preset_mode (optional, mapping of strings) a dp to control preset modes of the device.
Any value is allowed, but HA has some standard presets:
none, eco, away, boost, comfort, home, sleep, activityThere are also some presets defined by this integration for use with varioustranslation_keys, see translations/en.json for details. - swing_mode (optional, mapping of strings) a dp to control swing modes of the device.
Standard values are:
"off", "on", vertical, horizontal, both, non-standard values can also be used if needed. - swing_horizontal_mode (optional, mapping of strings) a dp to control horizontal swing independently of the vertical swing.
Standard values are:
"off", "on", non-standard values can also be used if needed. - temperature (optional, number) a dp to set the target temperature of the device. A unit may be specified as part of the attribute if a temperature_unit dp is not available, if not the default unit configured in HA will be used.
- target_temp_high (optional, number) a dp to set the upper temperature range of the device.
This dp should be paired with
target_temp_low, and is mutually exclusive withtemperature - target_temp_low (optional, number) a dp to set the lower temperature range of the device.
- temperature_unit (optional, string) a dp that specifies the unit the device is configured for. Values should be mapped to "C" or "F" (case sensitive) - often the device will use a boolean or lower case for this
- min_temperature (optional, number) a dp that specifies the minimum temperature that can be set. Some devices provide this, otherwise a fixed range on the temperature dp can be used.
- max_temperature (optional, number) a dp that specifies the maximum temperature that can be set.
cover
Either position or open should be specified.
- position (optional, number 0-100): a dp to control the percentage that the cover is open. 0 means completely close, 100 means completely open.
- control (optional, mapping of strings): a dp to control the cover. Mainly useful if position cannot be used.
Valid values are
open, close, stop - action (optional, string): a dp that reports the current state of the cover.
Special values are
opening, closing - open (optional, boolean): a dp that reports if the cover is open. Only used if position is not available.
- tilt_position (optional, number): a dp to control the tilt opening of the cover (an example is venetian blinds that tilt as well as go up and down). The range will be auto-converted to the 0-100 expected by HA.
fan
- switch (optional, boolean): a dp to control the power state of the fan
- preset_mode (optional, mapping of strings): a dp to control different modes of the fan.
Values
"off", low, medium, highused to be handled specially by HA as deprecated speed aliases. If these are the only "presets", consider mapping them as speed values instead, as voice assistants will respond to phrases like "turn the fan up/down" for speed. - speed (optional, number): a dp to control the speed of the fan (%). if a range is supplied, it will be automatically scaled to the 0-100 range. if a mapping is used for dicrete steps, the values must be mapped within that range.
- oscillate (optional, boolean): a dp to control whether the fan will oscillate or not.
- direction (optional, string): a dp to control the spin direction of the fan.
Valid values are
forward, reverse.
humidifier
Humidifer can also cover dehumidifiers (use class to specify which).
- switch (optional, boolean): a dp to control the power state of the fan
- mode (optional, mapping of strings): a dp to control preset modes of the device
- humidity (optional, number): a dp to control the target humidity of the device
- current_humidity (optional, number): a dp to report the current humidity measured by the device
- action (optional, string): a dp to report the current action the device is performing. Valid actions are
humidifying,drying,idleandoff
lawn_mower
activity (required, string): a dp to report the current activity of the mower. Valid activities are
mowing,paused,docked,error,returning(from LawnMowerActivities in https://github.com/home-assistant/core/blob/dev/homeassistant/components/lawn_mower/const.py). Any additional activities should be mapped to one of those, and exposed through an extra attribute or sensor entity that shows all the statuses that the mower is reporting.command (required, string): a dp to send commands to the mower. Recognised commands are
start_mowing,pauseanddock. Any additional commands should be implemented via abuttonorselectentity.
light
- switch (optional, boolean): a dp to control the on/off state of the light
- brightness (optional, number): a dp to control the dimmer if available. If a range is provided, the value will be automatically scaled into the 0-255 range for HA, so there is no need to provide a scale. If there is a fixed list of mappings, the values should be between 0 (off) and 255 (full brightness). If there is no switch dp, a brightness of 0 will be sent to turn the light off.
- color_temp (optional, number): a dp to control the color temperature if available. See
target_rangeabove for mapping Tuya's range into Kelvin. - rgbhsv (optional, hex): a dp to control the color of the light, using encoded RGB and HSV values. The
formatfield names recognized for decoding this field arer,g,b,h,s,v. If both RGB and HSV values are supplied by the light, the HSV will be preferred. Either RGB values or HS values are required. If V is missing, the brightness dp is required. - named_color (optional, string): a dp to control the color of the light, using a list of named colors. This is mutually exclusive with the rgbhsv dp. The list of recognised colors is from the HA COLORS table at https://github.com/home-assistant/core/blob/dev/homeassistant/util/color.py
- color_mode (optional, mapping of strings): a dp to control which mode to use if the light supports multiple modes.
Special values:
white, color_temp, hs, xy, rgb, rgbw, rgbww, others will be treated as effects, Note: only white, color_temp and hs are currently supported, others listed above are reserved and may be implemented in future when the need arises. If nocolor_modedp is available, a single supported color mode will be calculated based on which of the above dps are available. - effect (optional, mapping of strings): a dp to control effects / presets supported by the light.
Note: If the light mixes in color modes in the same dp,
color_modeshould be used instead. If the light contains both a separate dp for effects/scenes/presets and a mix of color_modes and effects (commonly scene and music) in thecolor_modedp, then a separate select entity should be used for the dedicated dp to ensure the effects fromcolor_modeare selectable.
lock
The unlock... dps below are normally integers, but can also be boolean, in which case no information will be available about which specific credential was used to unlock the lock.
- lock (optional, boolean): a dp to control the lock state: true = locked, false = unlocked.
- open (optional, boolean): a dp to open or close the door or gate controlled by the lock, or if marked readonly to report the open status.
- unlock_fingerprint (optional, integer): a dp to identify the fingerprint used to unlock the lock.
- unlock_password (optional, integer): a dp to identify the password used to unlock the lock.
- unlock_temp_pwd (optional, integer): a dp to identify the temporary password used to unlock the lock.
- unlock_dynamic_pwd (optional, integer): a dp to identify the dynamic password used to unlock the lock.
- unlock_offline_pwd (optional, integer): a dp to identify the offline password used to unlock the lock.
- unlock_card (optional, integer): a dp to identify the card used to unlock the lock.
- unlock_app (optional, integer): a dp to identify the app used to unlock the lock.
- unlock_face (optional, integer): a dp to identify the face used to unlock the lock.
- unlock_key (optional, integer): a dp to identify the key used to unlock the lock.
- unlock_ble (optional, integer): a dp to identify the BLE device used to unlock the lock.
- unlock_voice (optional, integer): a dp to identify the voice assistant user used to unlock the lock.
- request_unlock (optional, integer): a dp to signal that a request has been made to unlock, the value should indicate the time remaining for approval.
- approve_unlock (optional, boolean): a dp to unlock the lock in response to a request.
- request_intercom (optional, integer): a dp to signal that a request has been made via intercom to unlock, the value should indicate the time remaining for approval.
- approve_intercom (optional, boolean): a dp to unlock the lock in response to an intercom request.
- jammed (optional, boolean): a dp to signal that the lock is jammed.
number
- value (required, number): a dp to control the number that is set.
- unit (optional, string): a dp that reports the units returned by the number. This may be useful for devices that switch between C and F, otherwise a fixed unit attribute on the value dp can be used.
- minimum (optional, number): a dp that reports the minimum the number can be set to. This may be used as an alternative to a range setting on the value dp if the range is dynamic
- maximum (optional, number): a dp that reports the maximum the number can be set to. This may be used as an alternative to a range setting on the value dp if the range is dynamic
remote
- send (required, accepts a string): a dp to send remote codes.
- receive (optional, returns strings): a dp to receive learned commands on. If not supplied, the
remote.learn_commandservice call will not be available. - control (optional, accepts strings
"send_ir","study","study_exit"): a dp to send commands seperately from ir codes. If not supplied, commands will be JSON formatted and sent through the send dp. - delay (optional, accepts numbers): a dp to set the delay in ms between buttons when there are multiple in the send string. This is only used when a separate control dp is also supplied, otherwise the parameter is included in the JSON sent to the send dp.
code_type (optional, accepts integers): a dp to set the type of code being sent. The current implementation only supports type
0. This is only used when a separate control dp is also supplied, otherwise the parameter is included in the JSON sent to the send dp.selectoption (required, mapping of strings): a dp to control the option that is selected.
sensor
- sensor (required, number or string): a dp that returns the current value of the sensor.
- unit (optional, string): a dp that returns the unit returned by the sensor. This may be useful for devices that switch between C and F, otherwise a fixed unit attribute on the sensor dp can be used.
siren
- tone (required, mapping of strings): a dp to report and control the siren tone. As this is used to turn on and off the siren, it is required. If this does not fit your siren, the underlying implementation will need to be modified.
The value "off" will be used for turning off the siren, and will be filtered from the list of available tones. One value must be marked as
default: trueso that theturn_onservice with no commands works. - volume (optional, float in range 0.0-1.0): a dp to control the volume of the siren (probably needs a scale and step applied, since Tuya devices will probably use an integer, or strings with fixed values).
- duration (optional, integer): a dp to control how long the siren will sound for.
switch
- switch (required, boolean): a dp to control the switch state.
vacuum
- status (required, mapping of strings): a dp to report and control the status of the vacuum.
- command (optional, mapping of strings): a dp to control the statuss of the vacuum. If supplied, the status dp is only used to report the state.
Special values:
return_to_base, clean_spot, others are sent as general commands - locate (optional, boolean): a dp to trigger a locator beep on the vacuum.
- power (optional, boolean): a dp to switch full system power on and off
- activate (optional, boolean): a dp to start and pause the vacuum
- direction_control (optional, mapping of strings): a dp that is used for directional commands These are additional commands that are not part of status. They can be sent as general commands from HA.
- error (optional, bitfield): a dp that reports error status. As this is mapped to a single "fault" state, you could consider separate binary_sensors to report on individual errors
valve
- valve (required, boolean or integer): a dp that reports the current state of the valve, and if not readonly, can also be used to set the state. If a number, it should be a percentage between 0 and 100 indicating how far open the valve is. If a boolean, it should indicate open (true) or closed (false).
water_heater
current_temperature (optional, number): a dp that reports the current water temperature.
operation_mode (optional, mapping of strings): a dp to report and control the operation mode of the water heater. If
awayis one of the modes, another mode must be marked asdefault: trueto that theaway_mode_offservice knows which mode to switch out of away mode to.temperature (optional, number): a dp to control the target water temperature of the water heater. A unit may be specified as an attribute if the
temperature_unitdp is not available, otherwise the default of HA's current setting will be used.temperature_unit (optional, string): a dp that reports the unit the device is configured for. Values should be mapped to "C" or "F" (case sensitive) - often the device will use a boolean or lower case for this
min_temperature (optional, number): a dp that reports the minimum temperature the water heater can be set to, in case this is not a fixed value.
max_temperature (optional, number): a dp that reports the maximum temperature the water heater can be set to, in case this is not a fixed value.
away_mode (optional, boolean): a dp to control whether the water heater is in away mode.