Casdon TD Pro 2: fix translation key

custom_components/tuya_local/devices/casdon_td_pro_2.yaml

@@ -164,21 +164,21 @@ secondary_entities:
           - dps_val: 0
             value: "OK"
           - dps_val: 1
-            value: "E1"
+            value: "e1"
           - dps_val: 2
-            value: "E2"
+            value: "e2"
           - dps_val: 4
-            value: "E3"
+            value: "e3"
           - dps_val: 8
-            value: "E4"
+            value: "e4"
           - dps_val: 16
-            value: "E5"
+            value: "e5"
           - dps_val: 32
-            value: "E6"
+            value: "e6"
           - dps_val: 64
-            value: "E7"
+            value: "e7"
           - dps_val: 128
-            value: "E8"
+            value: "e8"
 
   - entity: sensor
     class: enum

custom_components/tuya_local/translations/en.json

@@ -126,14 +126,14 @@
                 "state_attributes": {
                     "fault_message": {
                         "state": {
-                            "E1": "E1: Chamber overheat protection (exceeds 290°C)",
-                            "E2": "E2: Evaporation tray overheat protection (exceeds 200°C)",
-                            "E3": "E3: Chamber low temperature protection (below 35°C)",
-                            "E4": "E4: Evaporation tray low temperature protection (below 35°C)",
-                            "E5": "E5: Sensor connection error (Open circuit)",
-                            "E6": "E6: Sensor malfunction (Short circuit)",
-                            "E7": "E7: Display board communication error",
-                            "E8": "E8: Water tank open (CN7) or Evaporation tray dry (CN3)"
+                            "e1": "E1: Chamber overheat protection (exceeds 290°C)",
+                            "e2": "E2: Evaporation tray overheat protection (exceeds 200°C)",
+                            "e3": "E3: Chamber low temperature protection (below 35°C)",
+                            "e4": "E4: Evaporation tray low temperature protection (below 35°C)",
+                            "e5": "E5: Sensor connection error (Open circuit)",
+                            "e6": "E6: Sensor malfunction (Short circuit)",
+                            "e7": "E7: Display board communication error",
+                            "e8": "E8: Water tank open (CN7) or Evaporation tray dry (CN3)"
                         }
                     }
                 }

custom_components/tuya_local/translations/zh-Hans.json

@@ -126,14 +126,14 @@
                 "state_attributes": {
                     "fault_message": {
                         "state": {
-                            "E1": "E1：腔体高温保护(腔体传感器温度高于290°C)",
-                            "E2": "E2：蒸发盘高温保护(蒸发盘传感器温度高于200°C)",
-                            "E3": "E3：腔体低温保护(连续工作5分钟温度低于35°C)",
-                            "E4": "E4：蒸发盘低温保护(连续工作5分钟温度低于35°C)",
-                            "E5": "E5：传感器连接出故障(腔体或蒸发盘传感器开路)",
-                            "E6": "E6：传感器感应出故障(腔体或蒸发盘传感器短路)",
-                            "E7": "E7：显示板通信故障",
-                            "E8": "E8：水箱开关（CN7）未闭合或者蒸发盘NTC（CN3）温度高于125℃并持续时间达25s后，缺水提示，并停止工作。"
+                            "e1": "E1：腔体高温保护(腔体传感器温度高于290°C)",
+                            "e2": "E2：蒸发盘高温保护(蒸发盘传感器温度高于200°C)",
+                            "e3": "E3：腔体低温保护(连续工作5分钟温度低于35°C)",
+                            "e4": "E4：蒸发盘低温保护(连续工作5分钟温度低于35°C)",
+                            "e5": "E5：传感器连接出故障(腔体或蒸发盘传感器开路)",
+                            "e6": "E6：传感器感应出故障(腔体或蒸发盘传感器短路)",
+                            "e7": "E7：显示板通信故障",
+                            "e8": "E8：水箱开关（CN7）未闭合或者蒸发盘NTC（CN3）温度高于125℃并持续时间达25s后，缺水提示，并停止工作。"
                         }
                     }
                 }