| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970 |
- ####################################################
- # Sample NRPE Config File
- # Written by: Ethan Galstad (nagios@nagios.org)
- #
- # Last Modified: 06/23/2001
- ####################################################
- # PORT NUMBER
- # Port number we should wait for connections on.
- # This must be a non-priveledged port (i.e. > 1024).
- server_port=5666
- # SERVER ADDRESS
- # Address that nrpe has to bind to in case there are
- # more as one interface and we do not want nrpe to bind
- # (thus listen) on all interfaces.
- #server_address=192.168.1.1
- # ALLOWED HOST ADDRESSES
- # This is a comma-delimited list of IP address of hosts that are allowed
- # to talk to the NRPE daemon.
- #
- # Note: The daemon only does rudimentary checking of the client's IP
- # address. I would highly recommend adding entries in your /etc/hosts.allow
- # file to allow only the specified host to connect to the port
- # you are running this daemon on.
- allowed_hosts=127.0.0.1,192.168.0.2
- # DEBUGGING OPTION
- # This option determines whether or not debugging
- # messages are logged to the syslog facility. 0=off, 1=on
- debug=0
- # COMMAND DEFINITIONS
- # Command definitions that this daemon will run. Definitions
- # are in the following format:
- #
- # command[<command_name>]=<command_line>
- #
- # When the daemon receives a request to return the results of <command_name>
- # it will execute the command specified by the <command_line> argument.
- #
- # Unlike Nagios, the command line cannot contain macros - it must be
- # typed exactly as it should be executed.
- #
- # Note: Any plugins that are used in the command lines must reside
- # on the machine that this daemon is running on! The examples below
- # assume that you have plugins installed in a /usr/local/nagios/libexec
- # directory.
- command[check_users]=/usr/local/nagios/libexec/check_users 5 10
- command[check_load]=/usr/local/nagios/libexec/check_load 5 10 15 20 25 30
- command[check_disk1]=/usr/local/nagios/libexec/check_disk 80 95 /dev/hda1
- command[check_disk2]=/usr/local/nagios/libexec/check_disk 80 95 /dev/hdb1
- command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs 5 10 Z
- command[check_total_procs]=/usr/local/nagios/libexec/check_procs 150 200
|
