| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387 |
- /******************************************************************************
- *
- * CHECK_MRTGTRAF.C
- *
- * Program: MRTG (Multi-Router Traffic Grapher) traffic plugin for Nagios
- * License: GPL
- * Copyright (c) 1999 Ethan Galstad (nagios@nagios.org)
- *
- * Last Modified: $Date$
- *
- * Command line: CHECK_MRTGTRAF <log_file> <expire_minutes> <AVG|MAX> <iwl> <icl> <owl> <ocl>
- *
- * Description:
- *
- * This plugin will check the incoming/outgoing transfer rates of a
- * router, switch, etc recorded in an MRTG log. If the newest log
- * entry is older than <expire_minutes>, a WARNING status is returned.
- * If either the incoming or outgoing rates exceed the <icl> or <ocl>
- * thresholds (in Bytes/sec), a CRITICAL status results. If either of
- * the rates exceed the <iwl> or <owl> thresholds (in Bytes/sec), a
- * WARNING status results.
- *
- * Notes:
- * - MRTG stands for the Multi Router Traffic Grapher. It can be
- * downloaded from
- * http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/mrtg.html
- * - While MRTG can monitor things other than traffic rates, this
- * plugin probably won't work with much else without modification.
- * - The calculated i/o rates are a little off from what MRTG actually
- * reports. I'm not sure why this is right now, but will look into it
- * for future enhancements of this plugin.
- *
- * License Information:
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *****************************************************************************/
- #include "config.h"
- #include "common.h"
- #include "utils.h"
- const char *progname = "check_mrtgtraf";
- int process_arguments (int, char **);
- int validate_arguments (void);
- void print_help (void);
- void print_usage (void);
- char *log_file = NULL;
- int expire_minutes = -1;
- int use_average = TRUE;
- unsigned long incoming_warning_threshold = 0L;
- unsigned long incoming_critical_threshold = 0L;
- unsigned long outgoing_warning_threshold = 0L;
- unsigned long outgoing_critical_threshold = 0L;
- int
- main (int argc, char **argv)
- {
- int result = STATE_OK;
- FILE *fp;
- int line;
- char input_buffer[MAX_INPUT_BUFFER];
- char *temp_buffer;
- time_t current_time;
- char *error_message;
- time_t timestamp = 0L;
- unsigned long average_incoming_rate = 0L;
- unsigned long average_outgoing_rate = 0L;
- unsigned long maximum_incoming_rate = 0L;
- unsigned long maximum_outgoing_rate = 0L;
- unsigned long incoming_rate = 0L;
- unsigned long outgoing_rate = 0L;
- double adjusted_incoming_rate = 0.0;
- double adjusted_outgoing_rate = 0.0;
- char incoming_speed_rating[8];
- char outgoing_speed_rating[8];
- if (process_arguments (argc, argv) != OK)
- usage ("Invalid command arguments supplied\n");
- /* open the MRTG log file for reading */
- fp = fopen (log_file, "r");
- if (fp == NULL)
- usage ("Unable to open MRTG log file\n");
- line = 0;
- while (fgets (input_buffer, MAX_INPUT_BUFFER - 1, fp)) {
- line++;
- /* skip the first line of the log file */
- if (line == 1)
- continue;
- /* break out of read loop */
- /* if we've passed the number of entries we want to read */
- if (line > 2)
- break;
- /* grab the timestamp */
- temp_buffer = strtok (input_buffer, " ");
- timestamp = strtoul (temp_buffer, NULL, 10);
- /* grab the average incoming transfer rate */
- temp_buffer = strtok (NULL, " ");
- average_incoming_rate = strtoul (temp_buffer, NULL, 10);
- /* grab the average outgoing transfer rate */
- temp_buffer = strtok (NULL, " ");
- average_outgoing_rate = strtoul (temp_buffer, NULL, 10);
- /* grab the maximum incoming transfer rate */
- temp_buffer = strtok (NULL, " ");
- maximum_incoming_rate = strtoul (temp_buffer, NULL, 10);
- /* grab the maximum outgoing transfer rate */
- temp_buffer = strtok (NULL, " ");
- maximum_outgoing_rate = strtoul (temp_buffer, NULL, 10);
- }
- /* close the log file */
- fclose (fp);
- /* if we couldn't read enough data, return an unknown error */
- if (line <= 2)
- usage ("Unable to process MRTG log file\n");
- /* make sure the MRTG data isn't too old */
- time (¤t_time);
- if (expire_minutes > 0
- && (current_time - timestamp) >
- (expire_minutes * 60)) terminate (STATE_WARNING,
- "MRTG data has expired (%d minutes old)\n",
- (int) ((current_time - timestamp) /
- 60));
- /* else check the incoming/outgoing rates */
- if (use_average == TRUE) {
- incoming_rate = average_incoming_rate;
- outgoing_rate = average_outgoing_rate;
- }
- else {
- incoming_rate = maximum_incoming_rate;
- outgoing_rate = maximum_outgoing_rate;
- }
- /* report incoming traffic in Bytes/sec */
- if (incoming_rate < 1024) {
- strcpy (incoming_speed_rating, "B/s");
- adjusted_incoming_rate = (double) incoming_rate;
- }
- /* report incoming traffic in KBytes/sec */
- else if (incoming_rate < (1024 * 1024)) {
- strcpy (incoming_speed_rating, "KB/s");
- adjusted_incoming_rate = (double) (incoming_rate / 1024.0);
- }
- /* report incoming traffic in MBytes/sec */
- else {
- strcpy (incoming_speed_rating, "MB/s");
- adjusted_incoming_rate = (double) (incoming_rate / 1024.0 / 1024.0);
- }
- /* report outgoing traffic in Bytes/sec */
- if (outgoing_rate < 1024) {
- strcpy (outgoing_speed_rating, "B/s");
- adjusted_outgoing_rate = (double) outgoing_rate;
- }
- /* report outgoing traffic in KBytes/sec */
- else if (outgoing_rate < (1024 * 1024)) {
- strcpy (outgoing_speed_rating, "KB/s");
- adjusted_outgoing_rate = (double) (outgoing_rate / 1024.0);
- }
- /* report outgoing traffic in MBytes/sec */
- else {
- strcpy (outgoing_speed_rating, "MB/s");
- adjusted_outgoing_rate = (double) (outgoing_rate / 1024.0 / 1024.0);
- }
- if (incoming_rate > incoming_critical_threshold
- || outgoing_rate > outgoing_critical_threshold) {
- result = STATE_CRITICAL;
- asprintf (&error_message, "Traffic CRITICAL %s. In = %0.1f %s, %s. Out = %0.1f %s",
- (use_average == TRUE) ? "Avg" : "Max", adjusted_incoming_rate,
- incoming_speed_rating, (use_average == TRUE) ? "Avg" : "Max",
- adjusted_outgoing_rate, outgoing_speed_rating);
- }
- else if (incoming_rate > incoming_warning_threshold
- || outgoing_rate > outgoing_warning_threshold) {
- result = STATE_WARNING;
- asprintf (&error_message, "Traffic WARNING %s. In = %0.1f %s, %s. Out = %0.1f %s",
- (use_average == TRUE) ? "Avg" : "Max", adjusted_incoming_rate,
- incoming_speed_rating, (use_average == TRUE) ? "Avg" : "Max",
- adjusted_outgoing_rate, outgoing_speed_rating);
- }
- else if (result == STATE_OK)
- printf ("Traffic OK - %s. In = %0.1f %s, %s. Out = %0.1f %s\n",
- (use_average == TRUE) ? "Avg" : "Max", adjusted_incoming_rate,
- incoming_speed_rating, (use_average == TRUE) ? "Avg" : "Max",
- adjusted_outgoing_rate, outgoing_speed_rating);
- else
- printf ("UNKNOWN %s\n", error_message);
- return result;
- }
- /* process command-line arguments */
- int
- process_arguments (int argc, char **argv)
- {
- int c;
- int option_index = 0;
- static struct option longopts[] = {
- {"logfile", required_argument, 0, 'F'},
- {"expires", required_argument, 0, 'e'},
- {"aggregation", required_argument, 0, 'a'},
- {"variable", required_argument, 0, 'v'},
- {"critical", required_argument, 0, 'c'},
- {"warning", required_argument, 0, 'w'},
- {"verbose", no_argument, 0, 'v'},
- {"version", no_argument, 0, 'V'},
- {"help", no_argument, 0, 'h'},
- {0, 0, 0, 0}
- };
- if (argc < 2)
- return ERROR;
- for (c = 1; c < argc; c++) {
- if (strcmp ("-to", argv[c]) == 0)
- strcpy (argv[c], "-t");
- else if (strcmp ("-wt", argv[c]) == 0)
- strcpy (argv[c], "-w");
- else if (strcmp ("-ct", argv[c]) == 0)
- strcpy (argv[c], "-c");
- }
- while (1) {
- c = getopt_long (argc, argv, "hVF:e:a:c:w:", longopts, &option_index);
- if (c == -1 || c == EOF)
- break;
- switch (c) {
- case 'F': /* input file */
- log_file = optarg;
- break;
- case 'e': /* expiration time */
- expire_minutes = atoi (optarg);
- break;
- case 'a': /* aggregation (AVE or MAX) */
- if (!strcmp (optarg, "MAX"))
- use_average = FALSE;
- else
- use_average = TRUE;
- break;
- case 'c': /* warning threshold */
- sscanf (optarg, "%lu,%lu", &incoming_critical_threshold,
- &outgoing_critical_threshold);
- break;
- case 'w': /* critical threshold */
- sscanf (optarg, "%lu,%lu", &incoming_warning_threshold,
- &outgoing_warning_threshold);
- break;
- case 'V': /* version */
- print_revision (progname, "$Revision$");
- exit (STATE_OK);
- case 'h': /* help */
- print_help ();
- exit (STATE_OK);
- case '?': /* help */
- usage ("Invalid argument\n");
- }
- }
- c = optind;
- if (argc > c && log_file == NULL) {
- log_file = argv[c++];
- }
- if (argc > c && expire_minutes == -1) {
- expire_minutes = atoi (argv[c++]);
- }
- if (argc > c && strcmp (argv[c], "MAX") == 0) {
- use_average = FALSE;
- c++;
- }
- else if (argc > c && strcmp (argv[c], "AVG") == 0) {
- use_average = TRUE;
- c++;
- }
- if (argc > c && incoming_warning_threshold == 0) {
- incoming_warning_threshold = strtoul (argv[c++], NULL, 10);
- }
- if (argc > c && incoming_critical_threshold == 0) {
- incoming_critical_threshold = strtoul (argv[c++], NULL, 10);
- }
- if (argc > c && outgoing_warning_threshold == 0) {
- outgoing_warning_threshold = strtoul (argv[c++], NULL, 10);
- }
-
- if (argc > c && outgoing_critical_threshold == 0) {
- outgoing_critical_threshold = strtoul (argv[c++], NULL, 10);
- }
- return validate_arguments ();
- }
- int
- validate_arguments (void)
- {
- return OK;
- }
- void
- print_help (void)
- {
- print_revision (progname, "$Revision$");
- printf
- ("Copyright (c) 2000 Tom Shields/Karl DeBisschop\n\n"
- "This plugin tests the UPS service on the specified host.\n\n");
- print_usage ();
- printf
- ("\nOptions:\n"
- " -F, --filename=STRING\n"
- " File to read log from\n"
- " -e, --expires=INTEGER\n"
- " Minutes after which log expires\n"
- " -a, --aggregation=(AVG|MAX)\n"
- " Test average or maximum"
- " -w, --warning\n"
- " Warning threshold pair \"<incoming>,<outgoing>\"\n"
- " -c, --critical\n"
- " Critical threshold pair \"<incoming>,<outgoing>\"\n"
- " -h, --help\n"
- " Print detailed help screen\n"
- " -V, --version\n" " Print version information\n\n");
- support ();
- }
- void
- print_usage (void)
- {
- printf
- ("Usage: %s -F <log_file> -a <AVG | MAX> -v <variable> -w <warning_pair> -c <critical_pair>\n"
- " [-e expire_minutes] [-t timeout] [-v]\n"
- " %s --help\n"
- " %s --version\n", progname, progname, progname);
- }
|