Contrib plugin cleanup

git-svn-id: https://nagiosplug.svn.sourceforge.net/svnroot/nagiosplug/nagiosplug/trunk@6 f882894a-f735-0410-b71e-b25c423dba1c

contrib/check_breeze.pl

@@ -0,0 +1,22 @@
+#!/usr/bin/perl
+
+# Plugin to test signal strength on Breezecom wireless equipment
+# Contributed by Jeffrey Blank
+
+$Host=$ARGV[0];
+$sig_crit=$ARGV[1];
+$sig_warn=$ARGV[2];
+$sig=0;
+$sig = `snmpget $Host public .1.3.6.1.4.1.710.3.2.3.1.3.0`;
+@test=split(/ /,$sig);
+$sig=@test[2];
+$sig=int($sig);
+if ($sig>100){$sig=100}
+
+print "Signal Strength at: $sig%\n";
+if ($sig<$sig_crit)
+  {exit(2)}
+if ($sig<$sig_warn)
+  {exit(1)}
+
+exit(0);

contrib/check_dhcp.c

@@ -4,7 +4,7 @@
 *
 * Program: DHCP plugin for Nagios
 * License: GPL
-* Copyright (c) 2001 Ethan Galstad (nagios@nagios.org)
+* Copyright (c) 2001-2002 Ethan Galstad (nagios@nagios.org)
 *
 * License Information:
 *
@@ -437,7 +437,7 @@ int send_dhcp_packet(void *buffer, int buffer_size, int sock, struct sockaddr_in
 	struct sockaddr_in myname;
 	int result;
 
-	result=sendto(sock,(char *)buffer,buffer_size,0,(struct sockaddr_in *)dest,sizeof(*dest));
+	result=sendto(sock,(char *)buffer,buffer_size,0,(struct sockaddr *)dest,sizeof(*dest));
 
 #ifdef DEBUG
 	printf("send_dhcp_packet result: %d\n",result);
@@ -480,11 +480,11 @@ int receive_dhcp_packet(void *buffer, int buffer_size, int sock, int timeout, st
 		/* why do we need to peek first?  i don't know, its a hack.  without it, the source address of the first packet received was
 		   not being interpreted correctly.  sigh... */
 		bzero(&source_address,sizeof(source_address));
-                recv_result=recvfrom(sock,(char *)buffer,buffer_size,MSG_PEEK,(struct sockaddr_in *)&source_address,&address_size);
+                recv_result=recvfrom(sock,(char *)buffer,buffer_size,MSG_PEEK,(struct sockaddr *)&source_address,&address_size);
 #ifdef DEBUG
 		printf("recv_result_1: %d\n",recv_result);
 #endif
-                recv_result=recvfrom(sock,(char *)buffer,buffer_size,0,(struct sockaddr_in *)&source_address,&address_size);
+                recv_result=recvfrom(sock,(char *)buffer,buffer_size,0,(struct sockaddr *)&source_address,&address_size);
 #ifdef DEBUG
 		printf("recv_result_2: %d\n",recv_result);
 #endif
@@ -812,7 +812,7 @@ void print_help(void){
 
 	/*print_revision(PROGNAME,"$Revision$");*/
 
-	printf("Copyright (c) 2001 Ethan Galstad (nagios@nagios.org)\n\n");
+	printf("Copyright (c) 2001-2002 Ethan Galstad (nagios@nagios.org)\n\n");
 	printf("This plugin tests the availability of DHCP servers on a network.\n\n");
 
 	print_usage();

contrib/check_flexlm.pl

@@ -0,0 +1,82 @@
+#!/usr/local/bin/perl
+#
+# usage: 
+#    check_flexlm.pl license_file
+#
+# Check available flexlm license managers.
+# Use lmstat to check the status of the license server
+# described by the license file given as argument.
+# Check and interpret the output of lmstat
+# and create returncodes and output.
+#
+# Contrary to the nagios concept, this script takes
+# a file, not a hostname as an argument and returns
+# the status of hosts and services described in that
+# file. Use these hosts.cfg entries as an example
+#
+#host[anchor]=any host will do;some.address.com;;check-host-alive;3;120;24x7;1;1;1;
+#service[anchor]=yodel;24x7;3;5;5;unix-admin;60;24x7;1;1;1;;check_flexlm!/opt/lic/licfiles/yodel_lic
+#service[anchor]=yeehaw;24x7;3;5;5;unix-admin;60;24x7;1;1;1;;check_flexlm!/opt/lic/licfiles/yeehaw_lic
+#command[check_flexlm]=/some/path/libexec/check_flexlm.pl $ARG1$
+#
+# Notes:
+# - you need the lmstat utility which comes with flexlm.
+# - set the correct path in the variable $lmstat.
+#
+# initial version: 9-10-99 Ernst-Dieter Martin edmt@infineon.com
+# current status: looks like working
+#
+# Copyright Notice: Do as you please, credit me, but don't blame me
+#
+
+# Just in case of problems, let's not hang Nagios
+$SIG{'ALRM'} = sub {
+	print "No Answer from Client\n";
+	exit 2;
+};
+alarm(20);
+
+$lmstat = "/opt/lic/sw/cadadm/default/bin/lmstat";
+
+$licfile = shift;
+
+#print "$licfile \n";
+
+open CMD,"$lmstat -c $licfile |";
+
+$serverup = 0;
+
+while ( <CMD> ) {
+  if ( /^License server status: [0-9]*@([-0-9a-zA-Z_]*),[0-9]*@([-0-9a-zA-Z_]*),[0-9]*@([-0-9a-zA-Z_]*)/ ) {
+	$ls1 = $1;
+	$ls2 = $2;
+	$ls3 = $3;
+	$lf1 = $lf2 = $lf3 = 0;
+	$servers = 3;
+  } elsif ( /^License server status: [0-9]*@([-0-9a-zA-Z_]*)/ ) {
+	$ls1 = $1;
+	$ls2 = $ls3 = "";
+	$lf1 = $lf2 = $lf3 = 0;
+	$servers = 1;
+  } elsif ( / *$ls1: license server UP/ ) {
+	print "$ls1 UP, ";
+	$lf1 = 1
+  } elsif ( / *$ls2: license server UP/ ) {
+	print "$ls2 UP, ";
+	$lf2 = 1
+  } elsif ( / *$ls3: license server UP/ ) {
+	print "$ls3 UP, ";
+	$lf3 = 1
+  } elsif ( / *([^:]*: UP .*)/ ) {
+	print " license server for $1\n";
+	$serverup = 1;
+  }
+}
+if ( $serverup == 0 ) {
+    print " license server not running\n";
+    exit 2;	
+}
+
+exit 0 if ( $servers == $lf1 + $lf2 + $lf3 );
+exit 1 if ( $servers == 3 && $lf1 + $lf2 + $lf3 == 2 );
+exit 2;

contrib/check_hltherm.c

@@ -0,0 +1,209 @@
+/******************************************************************************************
+ *
+ * CHECK_HLTHERM.C
+ *
+ * Program: Hot Little Therm temperature plugin for Nagios
+ * License: GPL
+ * Copyright (c) 1999-2002 Ethan Galstad (nagios@nagios.org)
+ *
+ * Last Modified: 02-28-2002
+ *
+ * Command line: check_hltherm <probe> <wtemp> <ctemp> [-l label] [-s scale] [-lower]
+ *
+ * Description:
+ *
+ * This plugin checks the temperature of a given temperature probe on a
+ * Hot Little Therm digital thermometer.  The plugin uses the 'therm' utility
+ * that is included with the HLT software to check the probe temperature.  Both
+ * the HLT digital thermometer and software are produced by Spiderplant. See
+ * their website at http://www.spiderplant.com/hlt for more information.
+ *
+ *****************************************************************************************/
+
+#include "config.h"
+#include "common.h"
+#include "popen.h"
+
+#define DEFAULT_TIMEOUT         10	/* default timeout in seconds */
+
+#define HLTHERM_COMMAND          "/usr/local/bin/therm"     /* this should be moved out to the configure script */
+
+
+static void timeout_alarm_handler(int); /* author must provide */
+int process_arguments(int, char **);
+
+int timeout_interval=DEFAULT_TIMEOUT;
+
+double wtemp=0.0L;
+double ctemp=0.0L;
+
+int check_lower_temps=FALSE;
+
+char probe[MAX_INPUT_BUFFER]="";
+char label[MAX_INPUT_BUFFER]="Temperature";
+char scale[MAX_INPUT_BUFFER]="Degrees";
+
+FILE *fp;
+
+
+int main(int argc, char **argv){
+	int result=STATE_OK;
+	char command[MAX_INPUT_BUFFER];
+	double temp=0.0L;
+	char input_buffer[MAX_INPUT_BUFFER];
+	int found=0;
+
+	/* process command line arguments */
+	result=process_arguments(argc,argv);
+
+	/* display usage if there was a problem */
+	if(result==ERROR){
+		printf("Incorrect arguments supplied\n");
+		printf("\n");
+		printf("Hot Little Therm temperature plugin for Nagios\n");
+		printf("Copyright (c) 1999-2002 Ethan Galstad (nagios@nagios.org)\n");
+		printf("Last Modified: 02-28-2002\n");
+		printf("License: GPL\n");
+		printf("\n");
+		printf("Usage: %s <probe> <wtemp> <ctemp> [-l label] [-s scale] [-lower]\n",argv[0]);
+		printf("\n");
+		printf("Options:\n");
+		printf(" <wtemp>  = Temperature necessary to result in a WARNING state\n");
+		printf(" <ctemp>  = Temperature necessary to result in a CRITICAL state\n");
+		printf(" [label]  = A descriptive label for the probe.  Example: \"Outside Temp\"\n");
+		printf(" [scale]  = A descriptive label for the temperature scale.  Example: \"Celsius\"\n");
+		printf(" [-lower] = Evaluate temperatures with lower values being more critical\n");
+		printf("\n");
+		printf("This plugin checks the temperature of a given temperature probe on a\n");
+		printf("Hot Little Therm digital thermometer.  The plugin uses the 'therm' utility\n");
+		printf("included with the HLT software to check the probe temperature.  Both the\n");
+		printf("HLT digital thermometer and software are produced by Spiderplant. See\n");
+		printf("their website at http://www.spiderplant.com/hlt for more information.\n");
+		printf("\n");
+		return STATE_UNKNOWN;
+	        }
+
+
+	result=STATE_OK;
+
+	/* Set signal handling and alarm */
+	if(signal(SIGALRM,timeout_alarm_handler)==SIG_ERR){
+		printf("Cannot catch SIGALRM");
+		return STATE_UNKNOWN;
+	        }
+
+	/* handle timeouts gracefully */
+	alarm(timeout_interval);
+
+	/* create the command line we're going to use */
+	snprintf(command,sizeof(command),"%s %s",HLTHERM_COMMAND,probe);
+	command[sizeof(command)-1]='\x0';
+
+	/* run the command to check the temperature on the probe */
+	fp=spopen(command);
+	if(fp==NULL){
+		printf("Could not open pipe: %s\n",command);
+		return STATE_UNKNOWN;
+	        }
+
+	if(fgets(input_buffer,MAX_INPUT_BUFFER-1,fp)){
+		found=1;
+		temp=(double)atof(input_buffer);
+	        }
+
+	/* close the pipe */
+	spclose(fp);
+
+	if(result==STATE_OK){
+
+		if(found==0){
+			printf("Therm problem - Could not read program output\n");
+			result=STATE_CRITICAL;
+		        }
+		else{
+			if(check_lower_temps==TRUE){
+				if(temp<=ctemp)
+					result=STATE_CRITICAL;
+				else if(temp<=wtemp)
+				       result=STATE_WARNING;
+			        }
+			else{
+				if(temp>=ctemp)
+					result=STATE_CRITICAL;
+				else if(temp>=wtemp)
+					result=STATE_WARNING;
+			        }
+
+			printf("Therm %s: %s = %2.1f %s\n",(result==STATE_OK)?"ok":"problem",label,temp,scale);
+		        }
+	        }
+
+	return result;
+        }
+
+
+/* process command-line arguments */
+int process_arguments(int argc, char **argv){
+	int x;
+
+	/* not enough options were supplied */
+	if(argc<4)
+		return ERROR;
+
+	/* first option is always the probe name */
+	strncpy(probe,argv[1],sizeof(probe)-1);
+	probe[sizeof(probe)-1]='\x0';
+
+	/* 2nd and 3rd options are temperature thresholds */
+	wtemp=(double)atof(argv[2]);
+	ctemp=(double)atof(argv[3]);
+
+	/* process all remaining arguments */
+	for(x=5;x<=argc;x++){
+
+		/* we got the lower temperature option */
+		if(!strcmp(argv[x-1],"-lower"))
+			check_lower_temps=TRUE;
+
+		/* we got the label */
+		else if(!strcmp(argv[x-1],"-l")){
+			if(x<argc){
+				strncpy(label,argv[x],sizeof(label));
+				label[sizeof(label)-1]='\x0';
+				x++;
+			        }
+			else
+				return ERROR;
+		        }
+
+		/* we got the scale */
+		else if(!strcmp(argv[x-1],"-s")){
+			if(x<argc){
+				strncpy(scale,argv[x],sizeof(scale));
+				scale[sizeof(scale)-1]='\x0';
+				x++;
+			        }
+			else
+				return ERROR;
+		        }
+
+		/* else we got something else... */
+		else
+			return ERROR;
+	        }
+
+	return OK;
+        }
+
+
+
+/* handle timeouts gracefully... */
+static void timeout_alarm_handler(int signo){
+
+	if(signo==SIGALRM){
+    
+		kill(childpid[fileno(fp)],SIGKILL);
+		printf("Therm problem - Check timed out after %d seconds\n",timeout_interval);
+		exit(STATE_CRITICAL);
+	        }
+        }

contrib/check_hprsc.pl

@@ -0,0 +1,215 @@
+#!/usr/bin/perl -wT
+#
+# Copyright (c) 2000 Hugo Gayosso
+#
+# Description:
+#    Nagios plug-in that monitors the resources on an HP-UX machine
+#    by querying the SNMP daemon
+#
+# License: General Public License (GPL)
+#          http://www.gnu.org/copyleft/gpl.txt
+#
+# ChangeLog
+#
+
+# Requirements: Perl 5.005 or higher
+
+# Variable initialization
+$ENV{'PATH'}="";
+$ENV{'ENV'}="";
+$ENV{'BASH_ENV'}="";
+
+
+if (-e "/usr/bin/snmpwalk") {
+  $snmpwalk = "/usr/bin/snmpwalk";
+} elsif (-e "/usr/local/bin/snmpwalk") {
+  $snmpwalk = "/usr/local/snmpwalk";
+}
+
+
+# HP-UX SNMP OIDs
+$filesystemID1_OID   = ".1.3.6.1.4.1.11.2.3.1.2.2.1.1";
+$mounted_OID         = ".1.3.6.1.4.1.11.2.3.1.2.2.1.3";
+$totalspace_OID      = ".1.3.6.1.4.1.11.2.3.1.2.2.1.4";
+$freespace_OID       = ".1.3.6.1.4.1.11.2.3.1.2.2.1.6";
+$path_OID            = ".1.3.6.1.4.1.11.2.3.1.2.2.1.10";
+$cpu_5min_OID        = ".1.3.6.1.4.1.11.2.3.1.1.4";
+
+use Getopt::Long;
+
+GetOptions( "check-filesystem"   => \$chk_fs,
+	    "show-filesystems"   => \$show_fs,
+	    "check-filesystemID" => \$chk_fsid,
+	    "check-cpu"          => \$chk_cpu,
+	    "host=s"             => \$target_host,
+	    "community=s"        => \$target_community,
+	    "filesystemID1=i"    => \$fsid1_opt,
+	    "filesystem=s"       => \$fs_opt,
+	    "warning=i"          => \$warning_opt,
+            "critical=i"         => \$critical_opt);
+
+if ($chk_fs) {
+    walk_data($snmpwalk, $target_host, $target_community, $mounted_OID );
+    walk_data($snmpwalk, $target_host, $target_community, $totalspace_OID );
+    walk_data($snmpwalk, $target_host, $target_community, $freespace_OID );    check_filesystem($fs_opt, $warning_opt, $critical_opt);
+} elsif ($show_fs) {
+    walk_data($snmpwalk, $target_host, $target_community, $filesystemID1_OID);
+    walk_data($snmpwalk, $target_host, $target_community, $mounted_OID );
+    walk_data($snmpwalk, $target_host, $target_community, $path_OID);
+    show_filesystem();
+} elsif ($chk_fsid){
+    $totalspace_fsID_OID = "$totalspace_OID.$fsid1_opt";
+    $freespace_fsID_OID = "$freespace_OID.$fsid1_opt";
+    walk_data($snmpwalk, $target_host, $target_community, $totalspace_fsID_OID);
+    walk_data($snmpwalk, $target_host, $target_community, $freespace_fsID_OID);
+    check_filesystemID1($fsid1_opt, $warning_opt, $critical_opt);
+} elsif ($chk_cpu) {
+    get_cpu_load($snmpwalk, $target_host, $target_community, $cpu_5min_OID);
+    check_cpu_5min($cpu, $warning_opt, $critical_opt);
+} else {
+    print "\n\nUsage:\n";
+    print "Checking 5-min CPU Load:\n";
+    print "     $0 --check-cpu -warning <threshold> --critical <threshold> --host <yourhost> --community <SNMP community>\n\n";
+    print "Checking local filesystem mounted on a host:\n";
+    print "     $0 --show-filesystems --host <hostname> --community <SNMP community>\n\n";
+    print "Checking by filesystem name:\n";
+    print "     $0 --check-filesystem --filesystem </dev/vg00/lvol1> --warning <% used space> --critical <% used space> --host <hostname> --community <SNMP community>\n\n";
+    print "Checking by filesystem ID:\n";
+    print "     $0 --check-filesystemID --filesystemID <filesystemID1> --warning <% used space> --critical <% used space> --host <hostname> --community <SNMP community>\n\n";
+}
+
+sub get_cpu_load {
+    my ($snmpwalk, $target_host, $target_community, $OID) = @_;
+    die "cannot fork: $!" unless defined($pid = open(SNMPWALK, "-|"));
+
+    if ($pid) {   # parent
+	while (<SNMPWALK>) {
+	    my @snmpdata = split(/:/,$_);
+	    $cpu = $snmpdata[1]/100;
+	}
+	close(SNMPWALK) or warn "kid exited $?";
+    } else {      # child
+	exec($snmpwalk,$target_host,$target_community,$OID)  or die "can't exec program: $!";
+    }
+}
+
+sub walk_data {
+#This function queries the SNMP daemon for the specific OID
+    my ($snmpwalk, $target_host, $target_community, $OID) = @_;
+
+    die "cannot fork: $!" unless defined($pid = open(SNMPWALK, "-|"));
+
+    if ($pid) {   # parent
+	while (<SNMPWALK>) {
+	    $output = $_;
+	    sort_walk_data($output);
+	}
+	close(SNMPWALK) or warn "kid exited $?";
+    } else {      # child
+	exec($snmpwalk,$target_host,$target_community,$OID)  or die "can't exec program: $!";
+    }
+}
+
+sub sort_walk_data {
+    my ($snmp_data) = @_;
+    @fields = split(/\./,$snmp_data);
+    $item = $fields[8];
+    $filesystemID1 = $fields[9];
+    @fields2 = split(/=/,$fields[10]);
+#   $filesystemID2 = $fields2[0];
+    $value = $fields2[1];
+    chomp($value);
+    if ($value =~ /"/) {
+        @fields3 = split(/"/,$value);
+        $value = $fields3[1];
+    }
+    if ($item == 3) {
+	$mounted{$filesystemID1} = "$value";
+    } elsif ($item == 4) {
+	$totalspace{$filesystemID1} = "$value";
+    } elsif ($item == 6) {
+	$freespace{$filesystemID1} = "$value";
+    } elsif ($item == 10) {
+	$filesystempath{$filesystemID1} = "$value";
+    }
+}
+
+sub show_filesystem {
+    print "\n\nfilesystemID1\tmounted filesystem\tfilesystem path\n";
+    foreach $element (keys %mounted) {
+	print "$element\t$mounted{$element}\t\t$filesystempath{$element}\n";
+    }
+    print "\n\n";
+}
+
+sub check_filesystem {
+
+# Warning  = percentage of used space >= $warning and < $critical
+# Critical = percentage of used space > $warning and >= $critical
+# OK       = percentage of used space < $warning and < $critical
+
+    my ($mounted_filesystem, $warning, $critical) = @_;
+    foreach $element (keys %mounted) {
+	if ($mounted{$element} eq $mounted_filesystem) {
+	    my $warning_result = $totalspace{$element}*(100-$warning)/100;
+	    my $critical_result = $totalspace{$element}*(100-$critical)/100;
+	    my $result_percent = $freespace{$element}*100/$totalspace{$element};
+	    if (($freespace{$element} <= $warning_result) && ($freespace{$element} > $critical_result)) {
+		printf "Only %d M (%d%s) free\n",$freespace{$element}/1024,$result_percent,"%";
+		exit 1;
+	    } elsif ($freespace{$element} <= $critical_result) {
+		printf "Only %d M (%d%s) free\n",$freespace{$element}/1024,$result_percent,"%";
+		exit 2;
+	    } else {
+		printf "Disk ok - %d M (%d%s) free\n",$freespace{$element}/1024,$result_percent,"%";
+		exit 0;
+	    }
+	}
+    }
+    print "$mounted_filesystem doesn't exist in $target_host\n\n";
+    exit -1;
+}
+
+sub check_filesystemID1{
+# Warning  = percentage of used space >= $warning and < $critical
+# Critical = percentage of used space > $warning and >= $critical
+# OK       = percentage of used space < $warning and < $critical
+
+    my ($fsid1, $warning, $critical) = @_;
+    foreach $element (keys %totalspace) {
+	if ($element eq  $fsid1) {
+	    my $warning_result = $totalspace{$element}*(100-$warning)/100;
+	    my $critical_result = $totalspace{$element}*(100-$critical)/100;
+	    my $result_percent = $freespace{$element}*100/$totalspace{$element};
+	    if (($freespace{$element} <= $warning_result) && ($freespace{$element} >= $critical_result)) {
+		printf "Only %d M (%d%s) free\n",$freespace{$element}/1024,$result_percent,"%";
+		exit 1;
+	    } elsif ($freespace{$element} <= $critical_result) {
+		printf "Only %d M (%d%s) free\n",$freespace{$element}/1024,$result_percent,"%";
+		exit 2;
+	    } else {
+		printf "Disk ok - %d M (%d%s) free\n",$freespace{$element}/1024,$result_percent,"%";
+		exit 0;
+	    }
+	}
+    }
+    print "$fsid1 doesn't exist in $target_host\n\n";
+    exit -1;
+}
+
+sub check_cpu_5min {
+    my ($cpu, $warn, $crit) = @_;
+    if ($cpu >= $crit) {
+	print "Critical- 5-min load: $cpu\n";
+	exit 2;
+    } elsif ($cpu >= $warn) {
+	print "Warning - 5-min load: $cpu\n";
+	exit 1;
+    } else {
+	print "Load ok - 5-min load: $cpu\n";
+	exit 0;
+    }
+}
+
+
+

contrib/check_ipxping.c

@@ -27,9 +27,10 @@
  *
  *****************************************************************************************/
 
-#include "../common/config.h"
-#include "../common/common.h"
+#include "config.h"
+#include "common.h"
 #include "netutils.h"
+#include "popen.h"
 
 /* this should be moved out to the configure script! */
 #define IPXPING_COMMAND	"/tmp/ipxping/ipxping"

contrib/check_mysql.c

@@ -30,8 +30,8 @@
  *   		 
  *******************************************************************/
 
-#include "../common/config.h"
-#include "../common/common.h"
+#include "config.h"
+#include "common.h"
 #include "mysql.h"
 
 MYSQL mysql;

contrib/check_uptime.c

@@ -21,10 +21,10 @@
  *
  *****************************************************************************/
 
-#include "common/config.h"
-#include "common/common.h"
-#include "common/utils.h"
-#include "common/popen.h"
+#include "config.h"
+#include "common.h"
+#include "utils.h"
+#include "popen.h"
 
 int main(int argc, char **argv)
 {

contrib/check_wave.pl

@@ -0,0 +1,77 @@
+#!/usr/bin/perl
+
+# CHECK_WAVE.PL
+# Plugin to test signal strength on Speedlan wireless equipment
+# Contributed by Jeffry Blank
+
+$Host=$ARGV[0];
+$sig_crit=$ARGV[1];
+$sig_warn=$ARGV[2];
+
+
+
+
+$low1 = `snmpget $Host public .1.3.6.1.4.1.74.2.21.1.2.1.8.1`;
+@test=split(/ /,$low1);
+$low1=@test[2];
+
+
+$med1 = `snmpget $Host public .1.3.6.1.4.1.74.2.21.1.2.1.9.1`;
+@test=split(/ /,$med1);
+$med1=@test[2];
+
+
+$high1 = `snmpget $Host public .1.3.6.1.4.1.74.2.21.1.2.1.10.1`;
+@test=split(/ /,$high1);
+$high1=@test[2];
+
+sleep(2);
+
+
+
+$snr = `snmpget $Host public .1.3.6.1.4.1.762.2.5.2.1.17.1`;
+@test=split(/ /,$snr);
+$snr=@test[2];
+$snr=int($snr*25);
+$low2 = `snmpget $Host public .1.3.6.1.4.1.74.2.21.1.2.1.8.1`;
+@test=split(/ /,$low2);
+$low2=@test[2];
+
+
+$med2 = `snmpget $Host public .1.3.6.1.4.1.74.2.21.1.2.1.9.1`;
+@test=split(/ /,$med2);
+$med2=@test[2];
+
+
+$high2 = `snmpget $Host public .1.3.6.1.4.1.74.2.21.1.2.1.10.1`;
+@test=split(/ /,$high2);
+$high2=@test[2];
+
+
+
+$low=$low2-$low1;
+$med=$med2-$med1;
+$high=$high2-$high1;
+
+$tot=$low+$med+$high;
+
+
+if ($tot==0)
+  {
+   $ss=0;
+  }
+else
+  {
+   $lowavg=$low/$tot;
+   $medavg=$med/$tot;
+   $highavg=$high/$tot;
+   $ss=($medavg*50)+($highavg*100);
+  }
+printf("Signal Strength at: %3.0f%,  SNR at $snr%",$ss);
+#print "Signal Strength at: $ss%,  SNR at $snr%";
+if ($ss<$sig_crit)
+  {exit(2)}
+if ($ss<$sig_warn)
+  {exit(1)}
+
+exit(0);

contrib/readme.txt

@@ -4,13 +4,22 @@ Contrib Plugins README
 This directory contains plugins which have been contributed by various people, but that
 have not yet been incorporated into the core plugins distribution.
 
+Most Perl plugins should work without modification.  Some of the C plugins may require
+a few tweaks to compile.
+
 If you have questions regarding the use of these plugins, try contacting the author(s)
-or post a message to the nagios-users mailing list (nagios-users@onelist.com)
+or post a message to the nagiosplug-help mailing list (nagiosplug-help@lists.sourceforge.net)
 requesting assistance.
 
 
-Plugin Overview
----------------
+
+Contrib Tarballs
+----------------
+
+In addition to the plugins located in this directory, there are some additional tarballs
+containing plugins in the tarballs/ subdirectory.  They have not yet been organized.
+A brief description of their contents follows.
+
 
 berger-ping.tar.gz      - Perl script version of the check_ping plugin and a corresponding
                           CGI (mtr.cgi) that uses mtr to traceroute a path to a host.
@@ -21,71 +30,13 @@ bowen-langley_plugins.tar.gz
 			  (Adam Bown & Thomas Langley)
 
 
-check_bgpstate.tar.gz   - Perl script intended for monitoring BGP sessions on Cisco routers.
+check_bgp-1.0.tar.gz   - Perl script intended for monitoring BGP sessions on Cisco routers.
 			  Only useful if you are using BGP4 as a routing protocol.  For 
 			  critical alert the AS (autonomous system) number has to be in the
 			  uplinks hash (see the source code).  Requires SNMP read community.
 			  (Christoph Kron)
 
-check_breeze.tar.gz	- Perl script to test signal strength on Breezecom wireless
-			  equipment (Jeffrey Blank)
-
-check_dns_random.tar.gz - Perl script to see if dns resolves hosts randomly from a list 
-                          using the check_dns plugin (Richard Mayhew)
-
-check_flexlm.tar.gz	- Perl script to check a flexlm licensing manager using lmtest
-			  (Ernst-Dieter Martin)
-
-check_hltherm.tar.gz    - C program to check the temperature on a Hot Little Therm temperature
-                          probe.  The HLT device, along with temperature probes, can be obtained
- 			  from Spiderplant at http://www.spiderplant.com
-			  (Ethan Galstad)
-
-check_ifoperstatus.tar.gz
-			- Perl script that checks the operational interface status (up/down) for
-			  one interface on cisco/ascend routers. Especially useful for monitoring 
-			  leased lines.  Requires SNMP read community and SNMP interface key.
-			  (Christoph Kron)	   
-
-check_ifstatus.tar.gz   - Perl script that checks operational interface status for every interface
-                          on cisco routers. Requires SNMP read community.
-			  (Christoph Kron)
-
-check_ipxping.tar.gz    - C program that it similiar to the check_ping plugin, except that it
-                          send IPX ping packets to Novell servers or other IPX devices.  This
-                 	  requires the ipxping binary for Linux systems.  It does NOT by work
-                          without modification with the ipxping binary for SunOS/Solaris.
-			  (Ethan Galstad)
-
-check_maxchannels.tar.gz
-			- Perl script that can only be used for monitoring Ascend/Lucent Max/TNT
-			  access server. Checks ISDN channels and modem cards. Also shows ISDN and
-			  modem usage.  Requires SNMP read community.
-			  (Christoph Kron)
-
-check_maxwanstate.tar.gz 
-			- Perl script that can only be used for monitoring Ascend/Lucent Max/TNT
-			  access server. Checks if every enabled E1/T1 interface is operational
-			  (link active). Requires SNMP read community.
-			  (Christoph Kron)
-
-check_memory.tgz	- C program to check available system memory - RAM, swap, buffers,
-			  and cache (Joshua Jackson)
-
-check_nfs.tar.gz	- Perl script to test and NFS server using rpcinfo
-			  (Ernst-Dieter Martin)
-			  <NOW PART OF check_rpc IN CORE>
-
-check_ntp.tar.gz        - Perl script to check an NTP time source (Bo Kernsey)
-			  <MOVED TO CORE>
-
-check_ora.tar.gz        - Shell script that will check an Oracle database and the TNS listener.
-			  Unlike the check_oracle plugin, this plugin detects when a database is
-			  down and does not create temp files (Jason Hedden)
-			  <MOVED TO CORE>
-
-check_pop3.tar.gz       - Perl script that checks to see if POP3 is running and whether or not
-			  authentication can take place (Richard Mayhew)
+check_memory.tgz        - C plugin to check available system memory
 
 check_radius.tar.gz     - C program to check RADIUS authentication. This is a hacked version of 
 	                  the Cistron Radiusd program radtest that acts as a plugin for Nagios.
@@ -95,24 +46,6 @@ check_radius.tar.gz     - C program to check RADIUS authentication. This is a ha
 		          will not appear in the core plugin distribution!
 		          (Adam Jacob)
 
-check_real.tar.gz	- C program to check the status of a REAL media server 
-			  (Pedro Leite)
-			  <MOVED TO CORE>
-
-check_rpc.pl.gz		- Perl script to check rpc services.  Will check to see if the a specified
-			  program is running on the specified server (Chris Kolquist)
-
-check_sap.tar.gz	- Shell script to check an SAP message or application server.  Requires
-			  that you install the saprfc-devel-45A-1.i386.rpm (or higher) package 
-			  on your system.  The package can be obtained from the SAP FTP site in 
-			  the /general/misc/unsupported/linux directory. (Kavel Salavec)
-
-check_uptime.tar.gz     - C program to check system uptime.  Must be compiled with the release
-                          1.2.8 or later of the plugins. (Teresa Ramanan)
-
-check_wave.tar.gz	- Perl script to test signal strength on Speedlan wireless
-			  equipment (Jeffrey Blank)
-
 hopcroft-plugins.tar.gz - Various example plugin scripts contributed by Stanley Hopcroft.
 			  Includes a plugin to check Internet connectivity by checking various
 			  popular search engines, a plugin to check the availability of login
@@ -121,27 +54,7 @@ hopcroft-plugins.tar.gz - Various example plugin scripts contributed by Stanley
 			  search via the web.
 			  (Stanley Hopcroft)
 
-maser-oracle.tar.gz     - This is a modification to the check_oracle plugin script that returns
-			  the response time in milliseconds.  Requires the Oracle tnsping utility.
-			  (Christoph Maser)
-
 radius.tar.gz           - Code modifications necessary to make the radexample app 
 			  supplied with the radiusclient code work as a RADIUS plugin
 			  for Nagios (Nick Shore)
 
-vincent-check_radius.tar.gz
-			- C program to check RADIUS authentication.  Requires the radiusclient 
-			  library available from ftp://ftp.cityline.net/pub/radiusclient/
-			  (Robert August Vincent II)
-			  <MOVED TO CORE>
-
-weipert-mysql.tar.gz    - C program to check a connection to a MySQL database server, with an
-			  optional username and password.  Requires mysql.h and libmysqlclient
-			  to compile (Time Weipert)
-
-wright-mysql.tar.gz     - Perl script to check MySQL database servers.  Requires that mysqladmin(1)
-			  be installed on the system (included in the MySQL distribution).  This
-			  plugin can accept warning and critical thresholds for the number of threads
-			  in use by the server (Mitch Wright)
-
-

plugins/.cvsignore

@@ -39,5 +39,5 @@ stamp-h*
 *.h
 Makefile
 Makefile.in
-config.h.in
+#config.h.in
 .deps

plugins/config.h.in

@@ -0,0 +1,223 @@
+/* plugins/config.h.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define to empty if the keyword does not work.  */
+#undef const
+
+/* Define for DGUX with <sys/dg_sys_info.h>.  */
+#undef DGUX
+
+/* Define if the `getloadavg' function needs to be run setuid or setgid.  */
+#undef GETLOADAVG_PRIVILEGED
+
+/* Define if your system has its own `getloadavg' function.  */
+#undef HAVE_GETLOADAVG
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if your struct nlist has an n_un member.  */
+#undef NLIST_NAME_UNION
+
+/* Define if you have <nlist.h>.  */
+#undef NLIST_STRUCT
+
+/* Define to `int' if <sys/types.h> doesn't define.  */
+#undef pid_t
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+
+/* Define to `unsigned' if <sys/types.h> doesn't define.  */
+#undef size_t
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+
+/* Define on System V Release 4.  */
+#undef SVR4
+
+/* Define if you can safely include both <sys/time.h> and <time.h>.  */
+#undef TIME_WITH_SYS_TIME
+
+/* Define if your <sys/time.h> declares struct tm.  */
+#undef TM_IN_SYS_TIME
+
+/* Define for Encore UMAX.  */
+#undef UMAX
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+   instead of <sys/cpustats.h>.  */
+#undef UMAX4_3
+
+#undef CGIURL
+#undef DF_COMMAND
+#undef HAVE_GETOPT_H
+#undef HAVE_GETOPT_LONG
+#undef HAVE_PROC_LOADAVG
+#undef HAVE_PROC_MEMINFO
+#undef HAVE_SSL
+#undef HAVE_SWAP
+#undef NSLOOKUP_COMMAND
+#undef PACKAGE_VERSION
+#undef PATH_TO_DIG
+#undef PATH_TO_FPING
+#undef PATH_TO_QSTAT
+#undef PATH_TO_SNMPGET
+#undef PATH_TO_SNMPGETNEXT
+#undef PATH_TO_UPTIME
+#undef PING_COMMAND
+#undef PING_PACKETS_FIRST
+#undef POSIX_STATE_DEFS
+#undef PROC_LOADAVG
+#undef PROC_MEMINFO
+#undef PS_COMMAND
+#undef PS_FORMAT
+#undef PS_RAW_COMMAND
+#undef PS_VARLIST
+#undef RSS_COMMAND
+#undef RSS_FORMAT
+#undef SOCKET_SIZE_TYPE
+#undef SSH_COMMAND
+#undef SWAP_COMMAND
+#undef SWAP_FORMAT
+#undef USE_PS_VARS
+#undef VSZ_COMMAND
+#undef VSZ_FORMAT
+#undef WHO_COMMAND
+#undef PACKAGE
+#undef VERSION
+
+/* Define if you have the getloadavg function.  */
+#undef HAVE_GETLOADAVG
+
+/* Define if you have the getopt_long_only function.  */
+#undef HAVE_GETOPT_LONG_ONLY
+
+/* Define if you have the select function.  */
+#undef HAVE_SELECT
+
+/* Define if you have the socket function.  */
+#undef HAVE_SOCKET
+
+/* Define if you have the strdup function.  */
+#undef HAVE_STRDUP
+
+/* Define if you have the strstr function.  */
+#undef HAVE_STRSTR
+
+/* Define if you have the strtod function.  */
+#undef HAVE_STRTOD
+
+/* Define if you have the strtol function.  */
+#undef HAVE_STRTOL
+
+/* Define if you have the strtoul function.  */
+#undef HAVE_STRTOUL
+
+/* Define if you have the <crypto.h> header file.  */
+#undef HAVE_CRYPTO_H
+
+/* Define if you have the <err.h> header file.  */
+#undef HAVE_ERR_H
+
+/* Define if you have the <errno.h> header file.  */
+#undef HAVE_ERRNO_H
+
+/* Define if you have the <libpq-fe.h> header file.  */
+#undef HAVE_LIBPQ_FE_H
+
+/* Define if you have the <mach/mach.h> header file.  */
+#undef HAVE_MACH_MACH_H
+
+/* Define if you have the <mysql/errmsg.h> header file.  */
+#undef HAVE_MYSQL_ERRMSG_H
+
+/* Define if you have the <mysql/mysql.h> header file.  */
+#undef HAVE_MYSQL_MYSQL_H
+
+/* Define if you have the <openssl/crypto.h> header file.  */
+#undef HAVE_OPENSSL_CRYPTO_H
+
+/* Define if you have the <openssl/err.h> header file.  */
+#undef HAVE_OPENSSL_ERR_H
+
+/* Define if you have the <openssl/pem.h> header file.  */
+#undef HAVE_OPENSSL_PEM_H
+
+/* Define if you have the <openssl/rsa.h> header file.  */
+#undef HAVE_OPENSSL_RSA_H
+
+/* Define if you have the <openssl/ssl.h> header file.  */
+#undef HAVE_OPENSSL_SSL_H
+
+/* Define if you have the <openssl/x509.h> header file.  */
+#undef HAVE_OPENSSL_X509_H
+
+/* Define if you have the <pem.h> header file.  */
+#undef HAVE_PEM_H
+
+/* Define if you have the <pgsql/libpq-fe.h> header file.  */
+#undef HAVE_PGSQL_LIBPQ_FE_H
+
+/* Define if you have the <postgresql/libpq-fe.h> header file.  */
+#undef HAVE_POSTGRESQL_LIBPQ_FE_H
+
+/* Define if you have the <regex.h> header file.  */
+#undef HAVE_REGEX_H
+
+/* Define if you have the <rsa.h> header file.  */
+#undef HAVE_RSA_H
+
+/* Define if you have the <signal.h> header file.  */
+#undef HAVE_SIGNAL_H
+
+/* Define if you have the <ssl.h> header file.  */
+#undef HAVE_SSL_H
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+
+/* Define if you have the <strings.h> header file.  */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <sys/loadavg.h> header file.  */
+#undef HAVE_SYS_LOADAVG_H
+
+/* Define if you have the <sys/socket.h> header file.  */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define if you have the <sys/time.h> header file.  */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <sys/types.h> header file.  */
+#undef HAVE_SYS_TYPES_H
+
+/* Define if you have the <syslog.h> header file.  */
+#undef HAVE_SYSLOG_H
+
+/* Define if you have the <uio.h> header file.  */
+#undef HAVE_UIO_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <x509.h> header file.  */
+#undef HAVE_X509_H
+
+/* Define if you have the crypt library (-lcrypt).  */
+#undef HAVE_LIBCRYPT
+
+/* Define if you have the crypto library (-lcrypto).  */
+#undef HAVE_LIBCRYPTO
+
+/* Define if you have the dgc library (-ldgc).  */
+#undef HAVE_LIBDGC
+
+/* Define if you have the ldap library (-lldap).  */
+#undef HAVE_LIBLDAP
+
+/* Define if you have the pq library (-lpq).  */
+#undef HAVE_LIBPQ
+
+/* Define if you have the radiusclient library (-lradiusclient).  */
+#undef HAVE_LIBRADIUSCLIENT